DM-RMC-100-F
DigitalMedia
™
Fiber Receiver & Room Controller 100
crestron.com
|
800.237.2041
> DigitalMedia
™
Fiber receiver and display controller
> DM
®
Fiber input supports up to 1000 ft (300 m) cable length
[1]
> Provides one HDMI
®
or DVI display output
[2]
> Handles HD video with Deep Color, 3D, and HDCP
> Handles Dolby
®
TrueHD, DTS-HD Master Audio
™
, and
uncompressed 7.1 linear PCM audio
> Provides 10/100 Ethernet and USB HID mouse/keyboard ports
> Enables device control via CEC, IR, RS-232, and Ethernet
> Provides two relay control ports and one contact sensing input
> Allows quick, easy setup and diagnostics
> Low-profile surface mount design
> Universal power pack included
The DM-RMC-100-F provides a convenient one-box interface solution
for a single display device as part of a complete Crestron
®
DigitalMedia
™
system. It functions as a DM
®
Fiber receiver and control interface,
providing a single HDMI
®
output along with Ethernet, USB HID, and a
variety of control ports. Its compact, low-profile design allows the
DM-RMC-100-F to be installed discreetly behind a flat panel display or
above a ceiling mounted projector. It connects to the head end or source
location using multimode fiber optic cable.
[1]
DigitalMedia
™
Fiber
As the leader in HDMI and control system technologies, Crestron developed
DigitalMedia (DM) to deliver the first complete HD AV distribution system to
take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI
and other AV sources to be distributed throughout a home, office, school,
or virtually any other facility. DigitalMedia Fiber distributes uncompressed
digital video and audio signals up to 1000 feet (300 m) using multimode
fiber optic cable
[1]
.
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-F,
supporting HD 1080p60 video and WUXGA computer signals with HDCP,
Deep Color, 3D, and multi-channel HD lossless audio — all through one
connection. The HDMI output can also handle DVI signals using an
appropriate adapter or interface cable
[2]
.
Two fiber strands connect the DM-RMC-100-F to a DM switcher or
transmitter, transporting video, audio, control, and networking signals all
through a pair of SC type optical connections.
[1]
Multiple DM-RMC-100-Fs
may be installed to handle each display in a multiroom distribution system,
all fed from a central DM-MD series switcher. Or, a single DM-RMC-100-F
can be fed straight from a DM Fiber transmitter. affording a simple solution
for extending a computer or AV signal to a single display.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates
high-speed Ethernet networking for a total signal distribution solution. The
DM-RMC-100-F includes a 10/100 Ethernet port, providing a convenient
LAN connection for a local network device.
Keyboard/Mouse Extender
The DM-RMC-100-F also functions as a keyboard/mouse extender,
allowing a USB HID-compliant keyboard and/or mouse to be connected at
the display location and used to control a computer or other component
located at the central equipment rack or some other remote location.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The DM-RMC-100-F
includes built-in RS-232, IR, and Ethernet control ports to allow
programmable control of the display device connected to it. But, it can also
provide an alternative to such conventional control methods by harnessing
the CEC (Consumer Electronics Control) signal embedded in HDMI. Through
its connection to the control system, the DM-RMC-100-F provides a
gateway for controlling the display device right through the HDMI
connection, potentially eliminating the need for any dedicated control
wires or IR emitters.
Two low-voltage relay ports are also included on the DM-RMC-100-F for
control of a projection screen or lift. In addition, a single digital input port is
provided to accommodate a power sensor or contact closure for enhanced
automation and monitoring.
Low-Profile Installation
The DM-RMC-100-F mounts to a wall, ceiling, or other flat surface. At less
than 1-1/2 inches (33 mm) deep, it fits easily behind a flat panel display or
above a ceiling-mounted projector. Connections are positioned on the top
and bottom of the unit. An array of indicators is provided on the front panel
for easy setup and troubleshooting.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
(3 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals