ISYS
®
WALL MOUNT TOUCHPANELS
Wall Mount Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
wall mount touchpanels
INTERFACE MODULES AND CABLES
TPMC-CH-IMW CAT5 Balanced AV Interface Wall Plate
The TPMC-CH-IMW is a wall plate version of the
TPMC-CH-IMC interface module, providing a wall
plate connection for new Isys
®
TPS and TPMC-CH
series touchpanels that utilize Crestron Home
®
(CH)
CAT5 Balanced AV connectivity*. It mounts into a
2-gang electrical box and includes front panel
connections for a single “triamese” cable (provided
with the touchpanel or sold separately). Several
TPMC-CH-IMW wall plates may be installed to
facilitate connectivity for a single movable
touchpanel at multiple locations.
Wired as part of a complete Crestron Home
CAT5 AV distribution system, the TPMC-CH-IMW
requires just a single CresCAT-D cable, carrying
Cresnet, bidirectional audio, and (1) video signal
up to 500 feet within a single bundled cable (observe
distance limitations based upon power consumption
for the touchpanel in use). The TPMC-CH-IMW can
also be connected to conventional audio and coaxial
video sources.
SPECIFICATIONS
Connectors – Front Panel
NET: (1) 4-pin 3.5mm detachable terminal block, pass-thru
from rear NET port
AUDIO: (1) 8-pin RJ45 female
Bidirectional CAT5 balanced stereo audio port
Output Impedance: 100 ohms balanced
Maximum Output Level: 2 V
RMS
Input Impedance: Infinite (unbuffered pass-thru to rear AUDIO
OUT port)
VIDEO: (1) 8-pin RJ45 female
CAT5 balanced video output port
Output Impedance: 100 ohms balanced
Connectors – Rear Panel
NET: (1) 4-pin 5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
VIDEO COMP/Y/Y, C/Pb, Pr: (1) 9-pin 3.5mm detachable
terminal block;
Provides (1) composite, S-Video, or component video input
Input Impedance: 100 ohms balanced (also accepts 75 ohm
unbalance);
Input Level: 1 V
P-P
nominal, 1.5 V
P-P
maximum
Maximum DC Offset: 1.5 Volts
Connects to any Crestron CAT5 Video Out port via CresCAT
cable, or a conventional coax video source
AUDIO IN: (1) 5-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level input
Input Impedance: 20k ohm balanced, 10k ohm unbalanced
Maximum Input Level: 4 V
RMS
balanced, 2 V
RMS
unbalanced
Connects to any Crestron CAT5 Audio port via CresCAT
cable, or a conventional audio source
AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block
Balanced stereo line-level output (unbuffered pass-thru from
front AUDIO port);
Connects to any Crestron CAT5 Audio port via CresCAT
cable, or a conventional balanced audio input
LED Indicators
PWR: (green) Indicates 24 Volts DC power supplied from
Cresnet control network
Power Requirements
Cresnet Power Usage: 2 Watts
(0.08 Amps @ 24 Volts DC)
Environmental
Temperature: 41° to 122°F (5° to 50°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
2-gang mountable in a standard electrical box (2.5 inch
deep minimum); includes black metal front panel Decora
®
inserts; requires Decora faceplate (provided by others)
Dimensions
Height: 4.11 in (10.44 cm)
Width: 3.50 in (8.89 cm)
Depth: 1.66 in (4.22 cm)
Weight
7.5 oz (0.21 kg)
*The TPMC-CH-IMW is not compatible with QuickMedia or 10-pin
RJ45 based systems.
114
Comments to this Manuals