Crestron DM-RMC-SCALER-C User Manual

Browse online or download User Manual for Car media receivers Crestron DM-RMC-SCALER-C. DM-RMC-SCALER-C - Commercial Integrator

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
DM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-C
DigitalMedia 8G+™ Receiver & Room Controller w/Scaler
The DM-RMC-SCALER-C provides an advanced one-box interface solution
for a single display device as part of a complete Crestron®
DigitalMedia™ system. It functions as a DM 8G+™ receiver, video
scaler, and control interface, providing a single HDMI® output along
with Ethernet, USB HID, RS-232, and IR control ports. Built-in scaling
allows the connected display to handle virtually any video signal
regardless of resolution and format. Its compact, low-profile design
allows the DM-RMC-SCALER-C to be installed discreetly behind a flat
panel display or above a ceiling mounted projector. It connects to the
head end or source location using a single CAT5e or Crestron DM 8G™
cable.
[1]
DigitalMedia 8G+™DigitalMedia 8G+™DigitalMedia 8G+™DigitalMedia 8G+™
As the leader in HDMI and control system technologies, Crestron
developed DigitalMedia to deliver the first complete HD AV
distribution system to take HDMI to a higher level. DigitalMedia
allows virtually any mix of AV sources to be distributed throughout
the home, office, school, or virtually any other facility.
DigitalMedia 8G+ breaks even further ground, providing a true one-wire
transport for moving high-definition video, audio, and Ethernet over
low-cost twisted-pair cable without any compression or repeaters. Just
one 8-conductor twisted-pair cable is required, supporting distances
up to 330 feet (100 m) using Crestron DM 8G Cable or CAT5e.
[1]
Multimedia Display InterfaceMultimedia Display InterfaceMultimedia Display InterfaceMultimedia Display Interface
A single HDMI digital AV output port is provided on the
DM-RMC-SCALER-C, supporting HDMI with HDCP, Deep Color and 3D
[2]
,
handling 1080p60 HDTV with multi-channel HD lossless audio as well as
WUXGA computer resolutions — all through a single connection. The
HDMI output can also handle DVI signals using an appropriate adapter
or interface cable
[3]
. In addition, there are RS-232, IR, and
Ethernet control ports provided for controlling the display device and
other equipment.
A single cable connects the DM-RMC-SCALER-C to a DM® switcher or
transmitter, transporting video, audio, control, and networking
signals all through one simple RJ45 connection.
[1]
Multiple
DM-RMC-SCALER-Cs may be installed to handle each display in a
multi-room distribution system, all fed from a central DM-MD series
switcher. Or, a single DM-RMC-SCALER-C can be fed straight from a DM
8G+ transmitter, affording a simple solution for extending a computer
or AV signal to a single display.
High-Definition ScalerHigh-Definition ScalerHigh-Definition ScalerHigh-Definition Scaler
Through a distributed scaler approach, DigitalMedia truly delivers the
most flexible and user-friendly solution for routing multiple
disparate sources to many different display devices. Employing DM
receivers with built-in scaling, DM allows an independent
high-performance scaler to be installed at every display device,
ensuring an optimal image on every screen. Distributed scaling allows
a high-definition 3D or high-res computer source to be viewed on
lower-resolution 2D displays without compromising the original signal,
letting you share your theater's full HD 1080p 3D image with smaller,
lesser displays in the kitchen, bathroom, and bedrooms.
The DM-RMC-SCALER-C accepts any video source from standard NTSC 480i
to HD 1080p60 w/Deep Color, as well as computer sources from VGA to
UXGA/WUXGA, and scales them perfectly to match the native resolution
of your video display. A range of common output resolutions are
supported to work with virtually any popular flat-panel display,
projector, or computer monitor. Intelligent frame rate conversion
enables support for 24p and PAL format sources, and 3D to 2D
conversion allows 3D content to be fed simultaneously to separate 3D
and 2D displays. Setup and use of the scaler is simplified through
fully automatic operation utilizing the display's EDID
[2,4]
.
Video Wall ProcessingVideo Wall ProcessingVideo Wall ProcessingVideo Wall Processing
The DM-RMC-SCALER-C has another trick up its sleeve, providing zoom
capability on its output to display just a portion of the source
image. Using this feature, multiple units may be combined to configure
a high-definition video wall composed of up to 16 individual
displays. Configurations of 2x2, 3x2, 3x3, 4x3, or 4x4 are supported,
and all that is required is a separate DM-RMC-SCALER-C for each
display, and a DM switcher with sufficient DM 8G+ outputs.
LAN ConnectivityLAN ConnectivityLAN ConnectivityLAN Connectivity
Along with high-definition AV and control, DigitalMedia also
integrates high-speed Ethernet networking for a total signal
distribution solution. The DM-RMC-SCALER-C includes a 10/100 Ethernet
port, providing a convenient LAN connection for a local network
device.
Keyboard/Mouse ExtenderKeyboard/Mouse ExtenderKeyboard/Mouse ExtenderKeyboard/Mouse Extender
The DM-RMC-SCALER-C also functions as a keyboard/mouse extender,
allowing a USB HID-compliant keyboard and/or mouse to be connected at
the display location, and used to control a computer or other
component located at the central equipment rack or some other
location.
Embedded Device ControlEmbedded Device ControlEmbedded Device ControlEmbedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The
DM-RMC-SCALER-C includes built-in RS-232, IR, and Ethernet control
ports to allow programmable control of the display device connected to
it. But, it can also provide an alternative to these conventional
control methods by harnessing the CEC (Consumer Electronics Control)
signal embedded in HDMI. Through its connection to the control system,
the DM-RMC-SCALER-C provides a gateway for controlling the display
device right through the HDMI connection, potentially eliminating the
need for any dedicated control wires or IR probes.
www.crestron.com 800.237.2041www.crestron.com 800.237.2041www.crestron.com 800.237.2041www.crestron.com 800.237.2041
Page view 0
1 2 3

Summary of Contents

Page 1

DM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CDigitalMedia 8G+™ Receiver & Room Controller w/ScalerThe DM-RMC-SCALER-C provides an a

Page 2

DM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CLow-Profile InstallationLow-Profile InstallationLow-Profile InstallationLow-Profile Instal

Page 3 - WeightWeightWeightWeight

DM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CDM-RMC-SCALER-CUSB HID: USB HID: USB HID: USB HID: (1) green LED, indicates a valid device connection and

Comments to this Manuals

No comments