Crestron CLS-C6M User Manual download pdf (Page 2)

CLS-C6M iLux

Integrated Lighting System w/Motion Detector

crestron.com

800.237.2041

Control System Integration

The CLS-C6M features two separate Cresnet control networks, one for

local devices and one for connection to a control system. Connecting the

CLS-C6M to a control system allows its functions to be controlled from

touch screens, RF wireless remotes, and even computers. The control

system interface also enables extensive flexibility for integration with other

systems such as security, HVAC and energy management, plus remote

management via SNMP and Crestron Fusion

Enterprise Management

Platform applications.

For a solution using Crestron’s infiNET

™

wireless technology instead of

Cresnet, see the CLS-C6MRF.

SPECIFICATIONS

Load Ratings

Dimmer Channels: 6

Maximum Per Channel: 800 Watts/VA (6.6 Amps @ 120 Volts AC)

Minimum Per Channel: 15 Watts/VA (0.125 Amps @ 120 Volts AC)

Module Total: 1920 Watts/VA (16 Amps @ 120 Volts AC)

Load Types: LED

[1]

, Incandescent, Magnetic Low-voltage, Neon/Cold Cath-

ode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic

Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V

via CLS-EXP Series expansion modules)

Power Requirements

100 to 127 Volts AC, 50/60Hz Line Power

Connections

LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block;

Cresnet

Master port for local devices including:

C2N-DB and CNX-B Series keypads, 16 maximum;

C2N-SSC-2, C2N-SDC, and C2N-SDC-DC shade controllers; 16 maximum;

Additional CLS-C6M or CLS-C6 units, 8 maximum;

Additional CNPWS-75 or other Cresnet power supply required beyond 4

devices; C2N-SDC-DC always requires an additional power supply

CONTROL SYSTEM: (1) 4-pin 5mm detachable terminal block;

Cresnet Slave port for connection to a control system

HOT: (1) Captive screw terminal

[3]

, line power input

LOAD1 – LOAD6: (6) Captive screw terminals

[3]

, dimmer channel outputs

1 – 6

NEUTRAL: (1) Captive screw terminal

[3]

GROUND: (1) Captive screw terminal

[3]

PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port

Controls

Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or

toggle recall/off) individual scenes, control shades, or for master lighting or

shade control; “scene mastering” option enables manual dimming utilizing

rocker button action; also used to adjust lighting levels when in “Lighting”

mode and shade positions when in “Shades” mode; additional functionality

configurable via software

Up/Down Button: (1) 3-position rocker pushbutton; configurable for

master lighting or shade control, or as a “shift” for Buttons 1-6; additional

functionality configurable via software

ON: (1) pushbutton, recalls “On” scene

OFF: (1) pushbutton, turns all lights off

LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes

SAVE, CANCEL, UP Arrow, DOWN Arrow: (4) Pushbuttons, navigate and

execute setup functions

Reset: Recessed miniature pushbutton for hardware reset

Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10

seconds

Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to

99 minutes

LED Indicators

Scenes: (6-white) Correspond with each “Scene” Button

High/Low: (2-white) Indicate “Shift” status

ON: (1-white) Indicates “On” Scene is selected

LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active

SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons

MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”

1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade

positions

Numeric Display: (2-green) 8-Segment digits, indicates modes and setup

values

IR Receiver

Reception Frequency: 36 kHz

Requires CLS-IRHT8 IR remote, sold separately

Motion Detector

Type: Infrared

Range: 20 to 30 feet at 4 foot elevation

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Mounts in a 4-gang electrical box, 3-1/2” deep minimum

Dimensions

Height: 4.48 in (114 mm)

Width: 8.89 in (226 mm)

Depth: 2.60 in (67 mm)

Weight

1.43 lb (649 g)

1 2 3 4

800.237.2041 1
CLS-C6M iLux 2

Comments to this Manuals

No comments

Crestron CLS-C6M User Manual Page 2

Comments to this Manuals

Related products and manuals for Dimmers Crestron CLS-C6M