Crestron CLSI-C6 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
CLSI-C6 iLux
®
Integrated Lighting System - International Version
crestron.com
|
800.237.2041
SPECIFICATIONS
Load Ratings
Dimmer Channels: 6
Maximum Per Channel: 800 Watts/VA (3.5 Amps @ 230 Volts AC)
Minimum Per Channel: 25 Watts/VA (0.108 Amps @ 230 Volts AC)
Module Total: 2200 Watts/VA (10 Amps @ 220 Volts AC);
2300 Watts/VA (10 Amps @ 230 Volts AC);
2400 Watts/VA (10 Amps @ 240 Volts AC)
Load Types: LED
[1]
, Incandescent, Magnetic Low-voltage, Neon/Cold Cath-
ode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic
Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V
via CLS-EXP Series expansion modules)
Power Requirements
220 to 240 Volts AC, 50/60Hz line power
Connections
LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block;
Cresnet
®
Master port for local devices including:
C2N-DB and CNX-B Series keypads, 16 maximum;
C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum;
Additional CLSI-C6 or CLSI-C6M units, 8 maximum;
Additional CNPWSI-75 or other Cresnet power supply required beyond 4
devices; C2N-SDC-DC always requires an additional power supply
CONTROL SYSTEM: (1) 4-pin 5mm detachable terminal block;
Cresnet Slave port for connection to a control system
HOT: (1) Captive screw terminal
[3]
, line power input
LOAD1 – LOAD6: (6) Captive screw terminals
[3]
, dimmer channel outputs
1 – 6
NEUTRAL: (1) Captive screw terminal
[3]
GROUND: (1) Captive screw terminal
[3]
PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port
Controls
Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or
toggle recall/off) individual scenes, control shades, or for master lighting or
shade control; “scene mastering” option enables manual dimming utilizing
rocker button action; also used to adjust lighting levels when in “Lighting”
mode and shade positions when in “Shades” mode; additional functionality
configurable via software
Up/Down Button: (1) 3-position rocker pushbutton; configurable for
master lighting or shade control, or as a “shift” for Buttons 1-6; additional
functionality configurable via software
ON: (1) pushbutton, recalls “On” scene
OFF: (1) pushbutton, turns all lights off
LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes
SAVE, CANCEL, UP Arrow, DOWN Arrow: (4) Pushbuttons, navigate and
execute setup functions
Reset: Recessed miniature pushbutton for hardware reset
Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10
seconds
Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to
99 minutes
LED Indicators
Scenes: (6-white) Correspond with each “Scene” Button
High/Low: (2-white) Indicate “Shift” status
ON: (1-white) Indicates “On” Scene is selected
LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active
SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons
MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”
1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade
positions
Numeric Display: (2-green) 8-Segment digits, indicates modes and setup
values
IR Receiver
Reception Frequency: 36 kHz
Requires CLS-IRHT8 IR remote, sold separately
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Mounts in a 4-gang electrical box, 3-1/2” (89 mm) deep minimum
Dimensions
Height: 4.48 in (114 mm)
Width: 8.89 in (226 mm)
Depth: 2.47 in (63 mm)
Weight
1.43 lb (649 g)
MODELS & ACCESSORIES
Available Models
CLSI-C6A: iLux
®
Integrated Lighting System - International Version, 230V,
almond
CLSI-C6B: iLux
®
Integrated Lighting System - International Version, 230V,
black
CLSI-C6W: iLux
®
Integrated Lighting System - International Version, 230V,
white
Available Accessories
C2N-CBD-E-A-S: Cameo
®
Express Keypad, Standard Mount, Almond
Smooth
C2N-CBD-E-B-S: Cameo
®
Express Keypad, Standard Mount, Black
Page view 1
1 2 3 4

Comments to this Manuals

No comments