Crestron Docking Station TPS-6X-DS Installation Guide download pdf (Page 13)

Crestron TPS-6X-IMCW Interface Module

Setup

Network Wiring

When wiring the Cresnet and Ethernet network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results

or damage to the equipment. Please use the Crestron Power

Calculator to help calculate how much power is needed for the

system (www.crestron.com/calculators

Cresnet

For networks with 20 or more devices, use a Cresnet Hub/Repeater

(CNXHUB) to maintain signal quality.

For more details, refer to “Check Network Wiring” which starts on page

17.

Ethernet

The TPS-6X-IMCW can also use high-speed Ethernet for

communications between the device and a control system, computer,

digital media server and other IP-based devices.

For information on connecting Ethernet devices in a Crestron system,

refer to the latest version of the Crestron e-Control



Reference Guide

(Doc. 6052), which is available from the Crestron website

(www.crestron.com/manuals

Installation Guide – DOC. 6874B Interface Module: TPS-6X-IMCW • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Crestron Docking Station TPS-6X-DS Installation Guide Page 13