Crestron TPS-IMC Specifications download pdf (Page 12)

Video Card for TPS/Tilt Panel Crestron TPS-VID

8 •• Video Card for TPS/Tilt Panel: TPS-VID Operations & Installation Guide - DOC. 5869A

TPS-VID Installation (5 of 6) - Re-install Touchpanel Base Cover Screws

TPS-6000

ZA*****

SEE MANUAL

FCC ID: EROTPS-6000

C000000

USE POWER PACK PW-2420RU

ELECTRONICS, INC

Rockleigh, NJ 07647

U.S.A.

ELECTRONICS, INC

Rockleigh, NJ 07647

U.S.A.

CLEAN PANEL WITH SOFT CLOTH ONLY

READ INSTRUCTION MANUAL BEFORE OPERATING

NO USER SERVICABLE PARTS UNDER THIS COVER

NOTE: The table below is provided as reference information about the

pinouts of the NET/VIDEO connector.

DESIGNATION

DESCRIPTION

1 *

+24V

Power (Network)

GND

Ground (Network)

C+

Chrominance (Positive)

C-

Chrominance (Negative)

Data (Network)

6 Z Data (Network)

7 Y+

Luminance (Positive)/Composite

8 Y-

Luminance (Negative)/Composite

9 GND Ground (Network)

+24V Power (Network)

TYPE

10-position

RJ45

While facing the NET/VIDEO port of the touchpanel, pin 1 is located at the upper-

left of the port.

13. Refer to the diagram on the next page for the video connector

signals and attach the 10-position net/video cable assembly or

net/video connector of triamese (three shielded cables within a

single jacket) cable assembly supplied with TPS-IMC-BV to

the NET/VIDEO port of the touchpanel. Connect the other end

of the cable assembly to the NET/VIDEO port of the

appropriate interface module (TPS-IMC is shown).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Crestron TPS-IMC Specifications Page 12

Comments to this Manuals

Related products and manuals for Networking Crestron TPS-IMC