Crestron IM-FTCC-B Installation Guide Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Crestron IM-FTCC-M iMedia FlipTop Computer Center
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
7
COMPUTER
PIN 1
PIN 6
PIN 15
(1) DB15HD female, RGB(VGA) input;
Formats: RGBHV, RGBS, RG
s
B;
Input impedance: 75 ;
Sync impedance: 1 k;
Maximum input level: 1 V
p-p
;
Maximum sync level: 5 V
p-p
;
Connects to 6 ft VGA patch cable (included).
PIN FUNCTION PIN FUNCTION
1 Red Video 9 No Connect
2 Green Video 10 Ground
3 Blue Video 11 No Connect
4 Reserved 12 Monitor Sense 1
5 Ground 13 Horizontal Sync
6 Red Ground 14 Vertical Sync
7 Green Ground 15 Monitor Sense 2
8 Blue Ground
8 GROUND
(1) 6-32 screw, chassis ground lug
4
.
1. The eight-pin RJ-45 iMedia port accepts CresCAT-IM or CAT5E/CAT6 carrying video, audio,
power and control signals. Refer to the following table for connector pinouts. Power is supplied to
pins 4 and 5 from the IM receivers.
PIN WIRE COLORS (EIA 568B)
iMEDIA ASSIGNMENT:
RGB AND AUDIO
1 WHITE/ORANGE
- RGB RED
2 ORANGE
+ RGB RED
3 WHITE/GREEN
- RGB GREEN
4 BLUE
+ AUDIO / POWER
5 WHITE/BLUE
- AUDIO / POWER
6 GREEN
+ RGB GREEN
7 WHITE/BROWN
- RGB BLUE
8 BROWN
+ RGB BLUE
2. For optimum performance, Crestron strongly recommends using CRESCAT-IM cable, available
from Crestron. Other high-quality/low skew (15 ns per 100 m maximum) CAT5e/CAT6 wiring may
also be used with varying performance.
3. To determine which is pin 1 on the cable, hold the cable so that the end of the eight pin modular jack
is facing away from you, with the clip down and copper side up. Pin 1 is on the far left.
4. Ensure that the unit is properly grounded.
Operations & Installation Guide – DOC. 6610A iMedia FlipTop Computer Center: IM-FTCC-M 9
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments