Crestron IM-WCC Installation Guide download pdf (Page 17)

Crestron IM-WCC-M iMedia Wall Plate Computer Center

Operation

The IM-WCC-M can be used to turn a system on or off, adjust volume or adjust the

microphone level.

Turn on the System

Press the SELECT button to turn on the system with the signals routed to the IM

receiver. The associated LED will light.

Adjust Volume

Turn the volume knob clockwise to raise the volume of the input; turn

counterclockwise to lower the volume of the input.

Adjust Microphone Level

Microphone level is adjusted by holding the SELECT button and turning the

rotary VOLUME knob.

When the SELECT button is released after adjusting the microphone volume

level, the source will remain at the volume setting it had prior to adjustment of the

microphone volume.

Control over the source audio volume level is regained by adjusting the

VOLUME knob without holding down the SELECT button. The source volume

level will gradually ramp up or down to the level set by the rotary VOLUME

knob.

Turn off the System

Press and hold the SELECT button for five seconds. The LED will flash and then

turn off.

Operations & Installation Guide – DOC. 6620A iMedia Wall Plate Computer Center: IM-WCC-M • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Crestron IM-WCC Installation Guide Page 17