Crestron CNX-BIPAD8 CAT5 Audio Distribution Processor
Operations Guide – DOC. 8160B CAT5 Audio Distribution Processor: CNX-BIPAD8 • 3
abilities, SystemBuilder allows the discerning AV system designer to deliver a
tailor-made audio distribution solution every time.
Preamplifier Circuits
The CNX-BIPAD8 preamplifier circuits provide the following controls for each of
the eight RCA outputs:
• Loudness - Activates the loudness function, commonly found on stereo
amplifiers, to boost low- and high-frequency signals at low volume
settings to compensate for natural hearing limitations at lower volume
levels.
• Volume - Sets minimum and maximum volume levels and controls the
relative audio level within that range.
• Balance, Bass, and Treble - Specifies levels for these settings relative to
a 50% neutral or balanced signal.
• Mono - Changes the audio setting from stereo to mono (monaural)
mode.
• Compensation - Source gain compensation that normalizes input levels
from different sources; for example, setting the volume range of a VCR
equal to that of a CD player.
• Mute - Electronically attenuates signal to silence.
• On/Off - Activates electronic relays that cut sound to a room.
Optional source and numeric keypads or any other Crestron network panel or
touchpanel may be added to the individual rooms to interface with the
CNX-BIPAD8. For more information regarding these devices, refer to the Product
Manuals section of the Crestron website (http://www.crestron.com/manuals
).
NOTE: Unit does not ship with default parameters for adjustable values (bass,
treble, or compensation). These values must be set in the program for the unit to
operate correctly.
Comments to this Manuals