Crestron ST-CP Specifications download pdf (Page 10)

SmarTouch™ Control Processor Crestron ST-CP

Typical Connection Diagram when Programming

15717 (PART OF ST-PK)

15710 (PART OF ST-PK)

CONTROL

SYSTEM

SERIAL

PORT

USE ADAPTER

(PART OF ST-PK)

NOTE:

UNITS IN THIS ILLUSTRATION

ARE NOT DRAWN TO SCALE.

TOUCHPANEL

AC POWER PACK

(CRESTRON MODEL

OR EQUIVALENT)

1. Attach the RJ11 to DB9F adapter (15556, supplied with ST-PK) to one

end of the PC to control processor cable (15717, supplied with ST-PK).

2. Attach the DB9 connector (of the adapter and cable combination) to the

RS-232 port on the PC.

3. Attach the RJ11 connector (of the adapter and cable combination) to

the ST-CP port, labeled PC.

4. Attach the 3.5 mm stereo connector of the touchpanel to control

processor cable (15710, supplied with ST-PK) to the touchpanel.

5. Attach the RJ11 connector of the touchpanel to control processor cable

to the ST-CP port, labeled NET.

6. Attach the 500 mA power pack to ST-CP (1000 mA power pack for

ST-CP/UK) and insert plug into outlet.

7. The touchpanel should either receive power from the supplied power

pack or an internal battery.

In the event that the two cables and adapter required to download a program from the

control processor to the touchpanel are lost or not acquired via the purchase of the

ST-PK, the following two diagrams are provided so that the cables can be made on

site.

PC to Control Processor Cable

6 • SmarTouch™ Control Processor: ST-CP Operations Guide - DOC. 5820

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Crestron ST-CP Specifications Page 10