Crestron ST-CP User Manual download pdf (Page 5)

Crestron WPR-DS Docking Station for WPR-48

Operations Guide – DOC. 6255A Docking Station for WPR-48: WPR-DS • 1

Docking Station for WPR-48:

WPR-DS

Introduction

Functions and Features

The Crestron

WPR-DS docking station is a companion product for the Crestron

WPR-48 waterproof wireless handheld remote. The WPR-DS is also available in an

international version, the WPRI-DS. All features are identical with the exception of

the supplied power pack (PWI-1210) for the international version. Refer to “Power

Source” on page 4 for more information.

NOTE: For simplicity, information in this guide applies to both the WPR-DS and

the WPRI-DS, except where noted.

The WPR-DS functions primarily as a charging station for the WPR-48’s built-in

lithium-ion battery. Recharge of the WPR-48 battery takes up to 1.5 hours. As long

as the contacts of the WPR-48 and the WPR-DS remain together, the WPR-DS

“trickle charges” the WPR-48 in an attempt to maintain the handheld remote at full

charge for optimum performance. The duration of a “trickle charge” is continuous as

long as the WPR-48 is not fully charged.

The WPR-DS also functions as an interface to a PC via the RS-232 port, for

uploading of new firmware and configuring the WPR-48.

Functional Summary

• Fast charge of lithium-ion battery

• Connects to PC via RS-232

• Enables upload of new firmware and configuring

PR-48

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Crestron ST-CP User Manual Page 5