DM-RMC-200-S2 DigitalMedia 8G
™
Single-Mode Fiber Receiver & Room Controller 200
crestron.com
|
800.237.2041
High-Definition Scaler
Through a distributed scaler approach, DigitalMedia delivers an incredibly
flexible and user-friendly solution for routing multiple disparate sources
to many different display devices. By placing an independent high-
performance scaler at every display device, DM ensures an optimal image
on every screen no matter what sources are selected. Distributed scaling
allows a high-res computer source to be viewed on any display in the
building. It also allows a high-definition 3D source to be viewed on lower-
resolution 2D displays without compromising the original signal, letting you
share your theater’s full HD 1080p 3D image with smaller, lesser displays
in other rooms.
The DM-RMC-200-S2 accepts any video source from standard NTSC
480i to Full HD 1080p60, as well as computer sources from VGA to UXGA/
WUXGA, and scales them perfectly to match the native resolution of your
video display. A range of common output resolutions are supported to work
with virtually any popular flat-panel display, projector, or computer monitor.
Intelligent frame rate conversion enables support for 24p and PAL format
sources, and 3D to 2D conversion allows 3D content to be fed
simultaneously to separate 3D and 2D displays.
[3]
Setup and use of the
scaler is simplified through fully automatic operation utilizing the
display’s EDID
[4]
.
Dual-Projector 3D Support
A pair of DM-RMC-200-S2s can be used to facilitate a dual-projector 3D
setup, steering just the left eye portion of a 3D signal to one projector, and
the right eye portion to the other. This is done using the scaler’s 3D to 2D
conversion mode, enabling 3D capability with scaling.
[3]
Video Wall Processing
The DM-RMC-200-S2 has another trick up its sleeve, providing zoom
capability and bezel compensation on its output to display just a portion
of the source image. Using this feature, multiple units may be combined
to configure a video wall composed of up to 16 individual displays.
Configurations of 2x2, 3x2, 3x3, 4x3, or 4x4 are supported, and all that
is required is a separate DM-RMC-200-S2 for each display, and a
DM switcher with sufficient DM 8G Fiber outputs.
Audio Extracting
The DM-RMC-200-S2 is equipped with an analog audio output, allowing
stereo audio signals to be extracted from the digital stream and fed to a
pair of speakers or a local sound system. The output volume is adjustable
via a control system using a keypad, touch screen, handheld remote, or
mobile device.
[5]
Built-in Audio Amplifier
Its built-in 30 Watt stereo amplifier allows the DM-RMC-200-S2 to drive a
pair of speakers without requiring a separate amplifier.
[5]
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates
high-speed Ethernet networking for a total signal distribution solution. The
DM-RMC-200-S2 includes a 10/100 Ethernet port, providing a convenient
LAN connection for a local network device.
DM-RMC-200-S2 – Rear, Top, Front, and Bottom Views
(13 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals