Crestron SW-WMC User Manual

Crestron Toolbox ReleaseNotesIntroductionThank you for installing the Crestron Toolbox. The following sections areavailable in the release notes:NEW C

same ID. Plug in the first one, use Network DeviceTree to change it. Plug in the next device, refresh thetree, you will see both correctly. Attempting

VptComServer (1.02.23)Added error messages and checking for device typeconflicts with addresses.Changed message for COM port conflicts.SMW Program Tre

CmVptLib32.dll (1.02.23)Reworked initial detection and follow reboot calls to followprogress better to ensure the deivce is completely up andready to

CmVptLib32.dll (1.02.22)Fixed VptParser for x where it would not advance to theproper character. Mainly affects audio abilities.Toolbox 1.02.21 (4-21-

Also set the time of the file within the zip to the time thesession was opened.CmVptCom.dll (1.0.0.1)Added CTBClientAppCommunications object for use i

as the serial.Made a SafeXModemCancel which repeatedly sendsXModemCancels and CR until we see a prompt thenattempts to flush the buffer so we are back

to script ref, abilty func ref, and release notes.Devices.ini (52)Added added SysErrLog AbilitySupport to CEN-TIA andCEN-IPODAdded C2N-IRGW1G, C2N-IRG

Delete toolbox_release_notes.html in install folder.Added USB driver installation.Toolbox 1.02.18 (3-16-2006)Modules affected:Devices.ini (51)Network

If a device never connected, the script would not timeoutand fail since it started executing on OnSessionReadyevent. Now we start immediately after op

CmVptGui.dll (1.1.1.8)Set Password char for password query dialog.Toolbox 1.02.16 (3-01-2006)Modules affected:Devices.ini (49)File Manager 1.0.0.4CmVp

to four digit year from two. May cause incorrect times to bereported.Fixed bug in verifying changed cresnet IDs. If the firstcheck fails, we check aga

Fixed error detection during project loads on some TPMCpanelsFixed bug loading firmware to PTX3 and TPMC-3X.Minor changes to the USB driver. This may

clipping.Devices.ini (48)Fixed ST-1550C support. Device reports as ST1550C andwas incorrectly added as alternate for ST-1500C.Set proper max project s

Modules affected:Devices.ini (46)CmVptLib32.dll (1.02.14)Bugs Fixed:CmVptLib32.dll (1.02.14)DisplayList for TPSG - Fixed bug where if only manifest fi

made then be sent to the SIMPL path on the device iffound.ComChannel.cpp : SendCommandWaitString/Token - Ifthese failed due to timeout, the buffer was

Web Page dialogAdded "Set User Password..." button.Added tooltips to help explain what the options arefor.Relabled buttons which were "

make sure display list directory exists beforesending filesFor new method, if there is insufficient spacefor vtz and it's contents to co-exist, t

docs for full details.Meshnet Diagnostic Tool (2.2.2.1)Better eror messages on initial connection if fails for variousreasons.Toolbox 1.02.10 (11-30-2

Devices.ini (38)Added reconnect delay timeouts for touch panels.CmVptLib32.dllDisplayListSend - Fixed bug which filed to give "File notfound"

CmVptGui.dll (1.1.1.2)VptComServer (1.02.07)Bugs Fixed:ServerFixed another deadlock situation which would nevertimeout.Fixed bug which did not allow s

Help FileFeatures added:ServerAdded Right click to server icon directly so you don't haveto bring up the dialog.Added "Other Crestron SW&quo

File Manager ToolFixed crash on startup.Text ConsoleFixed 'other char' and 'high char' rule matching bugs.Would never match either

Fixed selecting outputs for EDID groups not workingproperly for TX-300N-FFixed general race condition which could cause someAudio/Video Tools and the

Modules affected:Devices.ini (36)Macros.ini (21)CmVptGui.dll (1.1.1.0)VptAddressBook.dll (1.0.0.8)CmVtpLib32.dll (1.02.05)Script Tool (1.0.0.8)Text Co

System InfoAfter changing cresnet ID, refresh and context dialogswould not work until the tool was re-loaded.File ManagerFixed file sorting on column

early.Fixed bug in ability group detection and mapping cache.Was not updating with new ability group class it sodetected. Also led to memory leaks whi

workspaces to use the new text console.Modules affected:Devices.ini (35)CmVptGui.dll (1.1.0.9)CmVptLib32.dll (1.02.04)VptComServer (1.02.04)Test Patte

when linked.ensure refresh when linked.Network TreeFixed major memory / resource leaks.reliablity fixes for keeping status up to date between treeswhe

the ethernet card is disabled since it is different.For Ethernet link status abilities - if ethernet is disabled, thesefields are not reported so defa

NVRAMDisk. See ability_functions_NVRAMDiskCompactAdded FileXFerPutTo and FileXferGetFrom abilities toreplace Get and Put. These two take a StorageLoca

Added a 2SeriesCommandViaCresnetPasstoMethod forEtherIPTable to support the QM-FTCC-TPS_TPS-4.Fixed FirmwareUpdate for TPS command method. Now we wait

workspaces to use the new text console.Modules affected:Toolbox.exe (1.0.1.5)Text Console (2.1.0.3)Meshet Diagnostics (2.2.0.0)SMW Program Tree (4.0.0

Fixed references to old text console in various tools/menus.Features added:Added EAfnMeshnetMaster_GetAcquireState(MeshnetMasterGetAcquireState) abili

Fixed bug with TPMC-3X which caused project loads toreport a failure.Fixes for VPG-12/VPG-15 firmware loads.Fixed improper rounding for negative numbe

Fixed wrong descriptions in Tools->Quick Function Accessdialog.Fixed crash when detecting C2N-TTVFM and other devicesespecially devices in Loader.F

CmVptLib32.dll (1.01.13)VptComServer.exe (1.01.13)Toolbox.exe (1.0.1.3)File Manager (1.0.0.1)Network Analyzer (2.0.0.6)Devices.ini (30)Bugs Fixed:Corr

Modules affected:CmVptLib32.dll (1.01.12)VptComServer.exe (1.01.12)CmVptGui.dll (1.1.0.5)Devices.ini (29)Macros.ini (20)Program Tree Control (4.0.0.2)

support for SetID. ClearID, GetID, and GetIDRange all stillsupported. This method to be used for repeaters.MeshnetMasterParseAqcuireResponse - Added c

Ethernet IP Table context dialog now has *.ipt as a selection forfile types.Added bootloader firmware names to data file so support basicfirmware tarn

Server Serial CommunicationsFixed FileXferGet over serial where an extra <CR> isneeded to clear the device command buffer beforesending the next

Added a m_bParentDeviceSnoopMode variable to thePasstoMode class which allows parents to snoop on dataintended for childeren in passto.Added more debu

General GUI - Fixed bug in Firmware dialog where last selected filecould get corrupted and thus cause the dialog to not come up anylonger.Added scroll

Fixed vrash in several including, erase program, test dns,and wep page dialogs.System InfoAdjusted ethernet address and MAC address to allow forlarger

Changes for ilux console ocmmand changes in FW 1.00.03.Fixed cresnet id verification after change for ST-CS and deviceswhich do not show firmware vers

available individually as well)Added warning when downgrading IM Control Systemfirmware due to memory mapping changes.New Device SupportDM Tool Commis

Toolbox 1.01.05 (7-29-2005)Modules affected:CmVptLib32.dll (1.01.05)CmNetTreeXCtrl2.ocx (3.1.1.0)Bugs Fixed:Optimized GetDeviceSection in CAbilityTIOF

Save password once it is accepted for the duration of theconnection.Fixed bugs related to remote consoles.Fixed error chacking for FileSysInitialize f

VptComServer.exe (1.01.02)CmVptGui.dll (1.0.2.7)TestPatterns (1.0.0.2)Scripter.ocx (1.0.0.5)NetworkAnalyzer.ocx (2.0.0.1)SystemInfo.ocx (2.0.0.4)VptAd

Test Pattern Tools - Added EBU color bars.Network Analyzer - Complete rewrite!TPMC series support.TPS-12/15/17 support.Toolbox 1.1.1.0 (6-24-2005)Modu

Features Added:Server - Implemented ProgramGetUpTime ability.System Info - Change Software Info to Firmware Capabilities.System Info - Implemented Pro

DisplayList, Program, Firmware, validate file / paths still existwhen browsing. Default to most sepcific that is still available.Fixed crash on re-det

Made About Dialog re-sizable and fixed System Close button.When sizing tool frames, auto hide / show connection status andaddress boxes when too small

serials.Fixed multiple hangs in the server code.System Info - Added Touch Panel project info.Program Tree fixes for overriding non-verified devices.Cr

WCC-1, QM-WCC-2, QM-WMC-VCC, QM-TX2-CC, and QM-TX2-MCQM-AE4DM-MD8x8-RPS, DM-MD16x16-RPS, DM-MD32x32-RPSTPMC-9HD-DA-2GLPAC-DIMFLV4, GLPAC-DIMFLV4-PM4,

New Device SupportADMS - Project LoadingIPAD project support.P-EXPEXPT-AMFMXMP-CBI, P-CBI-WIREDDMC-RMC-100-S, DMC-DMC-100-C, DMC-S, DMC-C, DMC-CO, DM-

Fixes to a number Digital Media component firmware loads.Fixes to Program tree to resolve long load times on larger projectsFixes to Program tree to r

Special Notes - Changes in BehaviorWorkspace file format has changed slightly. This means anyexisting workspaces which had certain tools loaded willre

New Device SupportADMSTPMC-4SM Firmware LoadsTPMC-3X - Operating System LoadsPSPHD - Including Audio Configuration Tool available as aseparate install

Windows XP: 400MHz Pentium II w/256MB RAMA display setting of "256 Colors"Recommended PC configurationWindows XP: 1GHz Pentium 4 w/512MB RAM

DM-TX-300N and DM-TX-300N-FDM-TX-1G, DM-RX-1GDMC-CAT, DMC-CAT-DSPHD-DA-2QUADDIN-1DIM4, DIN-8SW8-IMPC-M5Other ChangesMicrosoft .NET library dependencie

Toolbox 1.15.071 (7-6-09)Significant Bug fixesMany stability and reliability fixes to the Network andProgram Trees.IP Table Support completely reworke

New FeaturesDevice Discovery Tool now shows Crestron Ethernetdevices with System Info Pane.Significant Bug fixes -Fixed bug where Functions Menu onNet

When loading a program, the query for loading the defaultIP Table now has a 'Cancel' option.File Manager will now compact the file system wh

Some stability fixes to address stalls and failures whenreconnecting to devices.New Device SupportCEN-ISERVERIPACQM-RX1-2G, QM-TX2-MC/CCTPS-17G-QMMLX-

Fixed SSL certificate management.Fixed save files from System Info on some devices like theAMS, AMS-AIP, and AES.Fixed TPMC-8X docking station issues.

New FeaturesNoneSignificant Bug fixesWhen connecting to an indirect cresnet device usingSystem Info, updates were very slow.Several fixes to support R

Improved defaults to help promote use of debugprofiles that save all debugging settings.Fixes for AMS-AIP include OSD transfer progress reportingand N

CEN-TRACK - Basic supportAMS-AIP - Basic support, compressed loads, otheroptimizationsTPMC-8X docking/undocking dialogHTT-B10X - check for power suppl

VptAddressBook.dll (2.0.0.3)CmVptLib32 (1.07.014)Bugs Fixed:Devices.zinis(135)AMS.ini (34)C2I-AMS-AIP-OSD (3) - Increased timeouts,TimeoutFastQuery=50

Fixed IP Table support for TPMC-8X-GAFixed "Unknown device" errors when connecting toMPC-M5Changes to improve stability of programmanagement

Devices.zinis(134)CmVptLib32.dll (1.07.05)CmVptGui (2.0.0.1)Script Manager (2.0.0.1)MediaTools (2.0.0.1)QM-Tools (2.0.0.0)VptAddressBook (2.0.0.2)CmPe

Fixed crash on new installs for Firmware Dialog. Lack of filehistory caused this.Script Manager (2.0.0.1)Added stripping of pipes from constant values

Same dispatch problem as beforeToolbox 1.07.03 (10-03-07)Modules affected:Devices.zinis (133)SC_Lib.dll (2.0.0.0)VptComServer.exe (1.07.03.002)CmVptLi

Fixed updating of IP address when changing. It was notseeing the change correctly and thus not connecting to thenew address. Also not posting the OnCo

Fixed crash on results > 4095 byte slong.Text console (3.0.0.0)Fixed crash for translating high characters in HEX(translated) mode.TIA Menu Builder

Fixed inconsistent list in IP address drop down.Fixed slotted addressing > 10 decimal. Was being taken asHex from drop down which is in decimal.Pac

Added SW-WMC with VerificationMethod=None andVersion=1.ComServer (1.07.00)Added auto purge to disk of debug logs. Polls once a minutefor no session ac

3. Seems it takes the remote ~5s to wake up.(8/24) Fixed crash in parsing ts device response in 2Seriesmethod."(8/27) When GetError is called and

Devices.zinis (132)AMS.ini (32)Changes to support Pro Sound Tools - Fixes todecode mode trim channels.CmVptGui.dll (1.1.4.1)Project Dialog - Changed t

Toolbox 1.06.22 (8-10-2007)Modules affected:CmVptLib32.dll (1.06.22)Devices.zinis(130)Bugs Fixed:CmVptLib32 (1.06.22)Fixed a bug which was causing a m

Test Report does not append .xml when periodused in save name"No 3D Support" should not be in EDID list ofDMToolsSupress "No Connection

Toolbox 1.06.19 (7-12-2007)Modules affected:VptAddressBook.dll (1.0.1.9)QM Audio Config (1.0.3.6)CmVptLib32.dll (1.06.19)Bugs Fixed:CmVptLib32.dll (1.

Bugs Fixed:Devices.zinis(128)Devices.ini(85)Added QM-MD8x8-HB support.Adagio_Devices.ini (3)Removed custom DevReset support for APAD - Was"-*,9&q

Fixed issue with com parameter changes (specifically SSL)resulting in the loss of incoming data events. Handle this tocall SetSessionParamater() to se

them.Greatly optimized debug data and logging. 4x (or more)faster on load time for TJI tools.Bug was fixed which was sending debug info to allclients

Changed the fix for hangnin ethernet communications toonly happen in the TCP comm class and to call OnRecieveinstead of ProcessDataReady to eliminate

character.VptAddressBook.dll (1.0.1.7)Fixed max cresnet ID to be FE. Get changed to FD inpassthru set of changes.Changed reference to "Passthru&q

Fixed bug in timestamp for Third-party audio config. wasmissing byte 0.Added code to amake use of the new PROGREADY commandto determine the boot state

CEN-RGBHV (2)Added all various derivatives with basic support.TouchPanels_TPMC.ini (3)Added TPMC-8L and corrected filespecs for otherTPMC panels.CtrlS

mismatch logic but OOTBF must also be running.VptAddressBook (1.0.1.6)Exposed Passthru Mode on indirect tab.Toolbox 1.06.08 (5-22-2007)Modules affecte

Modules affected:Devices.zinis (122)CmVptLib32.dll (1.06.07)Toolstub.exe (1.0.0.4)Package Update (1.0.4.0)Bugs Fixed:Devices.zinis (122)CtrlSys_QMRMCR

TPMC-9/TPMC-9L support for loading project using 16-levelanti-aliased fonts.3-Series authentication logon support for username andpassword.Identify Tr

Fixed call where "ValidateSelections" was not actuallyworking.Toolbox 1.06.06 (5-10-2007)Modules affected:Devices.zinis (121)VptComSever (1.

CtrlSys_PRO2Line.ini (v2) - Changed upper limit ofproblematic upgrade versions so both lower and uppper areinclusive. Now "3.137","3.15

Devices.ini(83)Added QM-MD4X4 support.AMS.ini (23)Added C2I-ADG-VIDEO1 as an alternate name forC2I-AMS-VIDEO. Some older loaders report as this.CmVptl

removed the AlisToSlot method of DisplayListsupport. This should be handled like this now.C2I-ADG-FPANEL - Changed Display list support to46 (Adagio m

Added additional debug and erorr messages to join infoprocessing.Fixed bug in Join Monitoring ability init which could causerecursion crash. Was not c

Modules affected:Devices.zinis (116)CmVptlib32.dll (1.05.02)Bugs Fixed:Devices.zinis (116)CtrlSys_QMRMCRXLine.ini (v2)changed lower limit of problemat

Modules affected:Devices.zinis (114)CmVptLib32.dll (1.05.00)DVPHD Tool (1.0.0.5)QM-Tools (1.0.3.3)Bugs Fixed:Devices.zinis (114)AMS.ini (v13)Fixed sub

Devices.zinis (113)CmVptLib32.dll (1.04.24)DVPHD Tool (1.0.0.4)Toolbox.exe (1.0.2.7)ToolStub.exe (1.0.0.1)Bugs Fixed:Devices.zinis (113)DVPHD.ini (19)

and any time ANY slot was stopped, StopParsingResponseswas called.Fixed crash when a device that was monitoring joins isreset. The UninitializeAbiliti

MacroTPMCSeriesTouch - Removed method 16support for Firmware, FileSystem, GenFileXfer.(cresnet passto) This is due to flow control issuesinternal to t

Prodigy ToolsNo Tool ChangesKnown IssuesThe following are items which may differ than what might beexpected but are by design and are not planned to c

SIMPL Debugger (1.0.1.1)Fixed bug in which if No signals were being debugged onstartup, a sync all was issued.Fixed a bug with the "relative sinc

filters.(v15) Fixed Speech Graphic EQ joins, both input andout were shifted by 4 due to hidden joins.(v16) Fixed Speech Graphic EQ Recall Preset digit

issue)Added "units_s" for Join interface andEVptRangeType_Seconds to idl file.AttributedObj Op Templates - AddedInterlockedDigitalEnum and I

Modules affected:CmVptLib32.dll (1.04.21)TIAMenuBuilder.ocx (1.0.1.7)Bugs Fixed:CmVptLib32.dll (1.04.21)For DisplayListGetInfo for TPSB series, make s

TPMC-4X - Increased all timeouts due to slow WiFiconnections.CmVptGui.dll (1.1.3.5)Meshnet Master Dialog - disable Start Acquire button untilfinished

CmVptLib32.dll (1.04.17)FileSystem - ensure any dir <folder>\ has the trailingbackslash. TPMC panels fail if it is not there. 2 series controlsy

file size once retrieved.Toolbox 1.04.15 (1-29-2007)Modules affected:Devices.zinis (109)QM Audio ConfigTIA Menu Bulider (1.0.1.4)SIMPL Debugger (1.0.0

when editing (not a new entry).Disallow double quotes in join value for "Serial Join is set to" events.Password Protection dialog didn'

For GenericFileXferGet. Fixed problem cleaning up onfailures. Also added a more textual error code descriptionfor xmodem failures.Toolbox 1.04.14 (1-9

SC_Lib.dll (1.0.0.6)Fixed bug so access to COM ports 10 through 255 works.Toolbox 1.04.13 (12-29-2006)Modules affected:CmVptlib32.dll (1.04.13)Devices

While using the QM Audio Config Tool, if you have a textcosnole open to the same device over cresnet, someoperations and updates may be slower than us

you first save the project. Now we call save to force a svaeand project name before sending.Fixed bug where new commands were shown in the correctorde

Toolbox 1.04.11 (12-04-2006)Modules affected:Devices.zinis (105)Program Tree (5.0.2.6)SIMPL Debugger (1.0.0.6)CmVptLib32.dll (1.04.11)CEN-TIA Menu Bui

EAfnTIAMenuProject_Send is sending modified only andthere are none that are modified.Added registry key to disable the auto pause resumebracketing fil

connected over USB for DevReste and PassTo Groups.Devices.ini (72)TPMC-4X - Fixed Display list load bug over ethernet.Was missing GenericFileXfer Supp

done through System Builder. Making sure we're ready togo is the correct thing to do anyway.ComChannel_TCP, in OnConnect, reset the last detectti

CmVptLib32.dll (1.04.07)Bugs Fixed:CmVptLib32.dll (1.04.07)Fixed crash related to graphic EQ info being loaded from thedata file.Toolbox 1.04.06 (10-3

Toolbox 1.04.04 (10-26-2006)Modules affected:Devices.zinis (103)CmVptLib32.dll (1.04.04)SIMPL Debugger (1.0.0.4)Program Tree (5.0.2.1)CmVptGUI.dll (1.

Toolbox 1.04.03 (10-19-2006)Modules affected:SIMPL Debugger (1.0.0.3)Program Tree (5.0.2.0)Bugs Fixed:SIMPL Debugger (1.0.0.3)Fixed up some menu items

on graphFixed bug when performing firmware updates wheremultiple dialogs were openedQM-Tools (1.01.04)Fixed bug when performing firmware updates where

CmVptGui.dll (1.1.3.1)CEN-TIA Menu Builder Tool (1.0.0.9)Program Tree (5.0.1.8)SIMPL Debugger (1.0.0.1)QM-Tools (1.01.03)MediaTools (1.00.03)Bugs Fixe

The following issues involve interactions between Toolbox andsome third party applications which may be installed on acomputer. There are no plans on

device reboots while a text console is open and is thenclosed after the reboot completes.Reworked DNS Management abilities.Depracated add/remove/list

Changed wording from Start/Stop Monitoring to Start/StopSending.Fixed menus to work when integrated with SIMPL.Added prompt to synchronize all signals

Removed Cresnet Slave support for the PAC2M.Changes CalibrateMode support for TPMC-4X to useTPMC-10 method.Added Media Tool Support info to C2N-VEQ4 a

does not contain a manifest file.Added XModem Interface call to flush receieve buffers.When an unknown character comes back as the start of apacket, w

Fixed loading of configuration for the QM-TXallow .1dB increments on gainsAdded "Clear Filters" button to Parametric Filter GraphBass and Tr

Added additional error messages to ethernet connectionswhen they fail in an attempt to make them moreunderstandable.For connections made the failure t

CmVptLib32.dll (1.02.36)CmVptGui.dll (1.1.2.8)VptComServer.exe (1.02.36)Program Tree Control (5.0.1.5)Bugs Fixed:CmVptLib32.dll (1.02.36)Added additio

Toolbox 1.02.35 (7-21-2006)Modules affected:Devices.ini (66)CmVptLib32.dll (1.02.35)VptComServer (1.02.35)CmVptGui.dll (1.1.2.7)Network Tree (4.0.5.1)

Added better progres indicators when trees are linked byposting progress info back and forth. Normally the first tobe scheduled would get progress and

message.Fixed some file transfer status posting.Network Tree (4.0.5.0)Fixed crash if control is closed while in the "Connecting..."state.Too

Bug FixesVarious fixes for Network Setup wizard related to:"Upload type not supported" message seen in uploaddialog.Crash when launching upl

Bugs Fixed:CmVptLib32.dll (1.02.32)Fixed insufficient memory error message text.Added better debug infor for async data reads.Extended device timeouts

support USB better.CEN-TIA - Added CompactFlash Support for MMC method.Added Product:39 support to GenericConsole to overideProductGetInfo calls.Added

for commands once it sees any of these. Checks for"\x03\x01\x0D" sequence.Fixed bug in GenericFileXferGetBatchFrom and PutBatchTo,where the

SMW Program Tree (5.0.0.9)Network Tree (4.0.4.8)CmVptLib32D.dll (1.02.30)Added 2SeriesMMC method and a version for CompactFlashability Group.Changed 2

== NotVerified.Network Tree (4.0.4.8)Fixed several bugs dealing with canceling detections andshow proper stats.Toolbox 1.02.29 (6-14-2006)Modules affe

Fixed bug in BasicDisplayGetFrontPanleLines which left aprompt in the input buffer unread.Fixed crash post TPMC-4X FW load. This was due to MFCcrashin

Enabled Xmit ID for QM-TXAdded cards for IM line, previously listed as Unknown.QM Audio Tool (1.0.0.9)Renamed tool from QM-Audio Configuration to QM-T

Network Tree Control (4.0.4.5)Toolbox.exe (1.0.2.1)Bugs Fixed:Devices.ini (59)Fixed parametric save and recall for serveral QM devices.Fixed graphic E

SMW Tree Control (5.0.0.5)Added status field to each device showing why it was notverified.Toolbox 1.02.26 (5-12-2006)Modules affected:Devices.ini (58

QM Audio Tool (1.0.0.8)Fixed bug where Linking Graphic Eqs caused tool to hangUpdate Delay value upon hitting Enter (RMCRX, 5x1, 7x2)Fixed bug which c