Crestron SWAMP(I)-24X8 User Manual download pdf

quickstart guide

SWAMP(I)-24X8

www.crestron.com

888.273.7876 201.767.3400

Specifications subject to change

without notice.

QUICKSTART DOC. 7050C (2028551) 07.12

Sonnex™ Multiroom Audio System

SWAMP(I)-24X8

Configuration

Use the “Installer Mode” menu or the Sonnex Tools software (part of Crestron Toolbox™ software) to configure a

Sonnex system.

Use the SWAMP-24X8’s “Installer Mode” menu to configure an entire SWAMP 24X8 system using only the front

panel controls.

To enter the “Installer Mode” menu, press and hold the ▼ and ▲ buttons for approximately five seconds. The

“Installer Mode” menu is displayed.

Press the ▼ or ▲ buttons to scroll through the available choices below and press ENTER.

• Source Setup: Select this option to adjust the compensation level for each input source.

• Zone Setup: Select this option to configure each output zone’s settings for audio, Sonnex links (busses),

bridging (with other outputs) and power output.

• Expander Status: Select this option to view the status of each connected SWAMPE Sonnex Multiroom

Audio Expander.

• Amplifier Status: Select this option to view the settings and operating status of each of the SWAMP-24X8

amplifiers as well as the amplifiers of connected SWAMPE Multiroom Audio Expanders.

• Network Setup: Select this option to configure and view the Ethernet settings of the SWAMP-24X8.

• Control Setup: Select this option to configure the SWAMP-24X8 for use with a Crestron control system

and lock/unlock the front panel controls.

• About: Select this option to view information about the firmware.

Alternatively, Sonnex Tools software can be used to quickly configure a system using a simple-to-use graphical

interface. For more information, refer to the Sonnex Tools help file.

Installer Mode

Source Setup



For details, refer to the latest revision of the

SWAMP(I)-24X8 Operations Guide, Doc. 7049.

Operation

The SWAMP-24X8 can be controlled from the front panel or Sonnex Tools software in Crestron Toolbox.

When operated from the front panel, the SWAMP-24X8 operates in either the Zone mode or Source mode.

Use the “Main” menu to select Zone mode or Source mode. To display the “Main” menu, press MENU until Main Menu

appears.

Power

To turn on the SWAMP-24X8 move the POWER switch to . To turn off the SWAMP-24X8, move the POWER switch

to .

Zone Mode

The Zone mode uses the front panel to route a source signal to a selected zone. To use the Zone mode:

1. From the “Main” menu, press the ▼ or ▲ buttons to display Zone Mode and press ENTER.

2. Press the ZONE button of the zone to be controlled.

3. Press the SOURCE button of the source to be routed. The associated SOURCE and ZONE LEDs light.

Alternatively, press the ZONE button twice to turn on the zone and connect the last-selected source.

4. Press MENU to return to the “Main” menu.

Source Mode

The Source mode uses the front panel to select a source signal and route it to multiple zones. To use the Source mode:

1. From the “Main” menu, press the ▼ or ▲ buttons to display Source Mode and press ENTER.

2. Press the SOURCE button of the source to be routed. The associated SOURCE LED lights.

3. Press the ZONE button(s) of the zone(s) to be selected. The associated ZONE LED(s) lights.

To remove a zone from a source, press the desired ZONE button. The associated ZONE LED turns off.

4. Press MENU to return to the “Main” menu.

Volume Control

To raise the volume in the selected zone(s), turn the VOLUME knob clockwise. To lower the volume in the selected

zone(s), turn the VOLUME knob counterclockwise.

Main Menu

Source Mode

▲

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, Cresnet, Crestron Toolbox, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other

trademarks may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

NOTE: For more information, refer to the Crestron Toolbox help file.

SWAMP(I)-24X8 1

Summary of Contents

Page 1 - SWAMP(I)-24X8

2quickstart guide SWAMP(I)-24X8www.crestron.com888.273.7876 201.767.3400 Specifications subject to change without notice.QUICKSTART DOC. 7050C (2028

Comments to this Manuals

No comments

Crestron SWAMP(I)-24X8 User Manual

Browse online or download User Manual for Unknown Crestron SWAMP(I)-24X8. SWAMP User Guide (Page 2)

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Crestron SWAMP(I)-24X8