Crestron AMP-2210S Installation Guide download pdf (Page 10)

Commercial Power Amplifiers Crestron AMP-2210S/3210S

AMP-2210S/3210S Specifications (Continued)

SPECIFICATION DETAILS

Audio

Typical of mono amplifier

channels (Continued)

Damping Factor >100

Protection

Over current, over/under voltage, over

temperature, DC offset

Frequency Response 20 Hz to 20 kHz ±0.5 dB

THD

0.05% at 1kHz at full rated power at 4/8

Ohms, 8 Ohms bridged, or 70/100 Volts;

0.1% at 20 Hz to 20 kHz, 120 W at 8 Ohms;

0.2% at 20 Hz to 20 kHz, 210 W at 4 Ohms;

0.1% at 20 Hz to 20 kHz, 420 W at 8 Ohms

bridged;

S/N Ratio >103 dB, A-weighted

Crosstalk >70 dB @ 1kHz

Gain

23 dB with INPUT LEVEL control set at

12 o’clock nominal position

Input Sensitivity

2.22 V

rms

for rated output power with INPUT

LEVEL control set at 12 o’clock nominal

position

Input Detection Threshold 40 mV RMS @ 1 kHz

Input Level Adjustment ±10 dB from nominal

Power Requirements

Main Power 100-240 Volts AC, 50/60 Hz

Power Consumption,

AMP-2210S

62 Watts @ 8 Ohms, all channels driven at

1/8 power;

88 Watts @ 4 Ohms, all channels driven at

1/8 power;

26 Watts, all channels idle;

<1 W in standby

Power Consumption,

AMP-3210S

85 Watts @ 8 Ohms, all channels driven at

1/8 power;

126 Watts @ 4 Ohms, all channels driven

at 1/8 power;

32 Watts, all channels idle;

<1 W in standby

Environmental

Temperature 41° to 104° F (5° to 40° C)

Humidity 10% to 90% RH (non-condensing)

Heat Dissipation,

AMP-2210S

110 BTU/Hr @ 8 Ohms, all channels driven

at 1/8 power;

121 BTU/Hr @ 4 Ohms, all channels driven

at 1/8 power;

89 BTU/Hr, all channels idle;

<3.4 BTU/Hr in standby

(Continued on following page)

4  Commercial Power Amplifiers: AMP-2210S/3210S Operations & Installation Guide – DOC. 7251A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Crestron AMP-2210S Installation Guide Page 10

Comments to this Manuals

Related products and manuals for Audio amplifiers Crestron AMP-2210S