Crestron CT-3000 Specifications Page 23
- Page / 94
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Crestron e-control Database Manager SW-DBM
23 •• Server Configuration In Depth Installation & Reference Guide — DOC. 5823
server-signal block interface; i.e., information that all signal blocks must have to
be handled by the server as signal blocks.)
• Optional signal definitions. Words shown in the Signal Block Definition window
in bold case are names of optional signals implemented by the signal block.
These are included in the signal block definition (they are "defined") either by
checking the adjacent checkbox, or (in the case of a set of enumerated signals)
by supplying a non-zero number in the adjacent text field. Undefined signals do
not appear in the signal list and must not appear in the matching Intersystem
Communications symbol on the control system side. Be aware that there may
also be a number of non-optional signals which are not shown in the window.
• Behavior options. These have specific effects on signal block behavior when the
server protocol is running.
The highest numbered signal in the signal block’s input or output signal lists is
shown in the box in the upper-right corner. This is based on the signal offset entered
in the adjacent box and the current signal block definition. This value is updated
synchronously as the user interacts with the window. This box turns red when the
highest analog or serial signal number on either the input or the output lists exceed
1023; or should the highest digital signal number exceed 4095.
Interface Definition
All signal blocks require the following basic information. Fields for these data are
shown across the top of all Signal Block Definition windows.
Name
A unique signal block name is required here. This name is used in the server’s user
interface to identify the signal block. It is also sent along with error messages to the
control system to identify the source of the error. We recommend choosing a name
that reflects either the location of the control system (such as BOOTH3) or its
function (such as PHONEBOOK).
COM Settings
The COM Settings list box contains the names of all the COM Settings definitions
from the COM Settings tab. Point the signal block to a particular COM Settings
definition by selecting it from the list.
Each signal block must be associated with a control system. Control systems are
defined separately under the COM Settings tab. You may define the signal blocks
first if you like, then define the systems, and come back and make the associations
later. Note, however, that signal blocks cannot be activated without first associating a
system, through its COM Settings connection, with the signal block.
Channel
For systems with multiple Virtual COM Port channels defined, select a channel here.
Signal Offset
When a signal block shares a signal space (a channel) with another signal block, they
both cannot begin numbering their signals at 0. In such a case, supply values space
the signal blocks’ signals properly — such that they do not overlap with each other.
If any signal blocks’ signal spaces overlap, attempting to start the server protocol
results in an error.
Auto-enable
If this box is checked, the signal block is automatically enabled when the server
protocol is started.
- CRESTRON 1
- Contents 2
- Crestron 3
- Introduction 6
- VT-3500 VT-3500 VT-3500 7
- Leading Specifications 8
- Requirements 8
- Installation 9
- Licensing 9
- Obtaining a License 10
- Basic Server Setup 11
- Communications Setup 12
- Control System Side, RS-232 13
- Control System Side, TCP/IP 14
- Test Communications 15
- Server Configuration In Depth 16
- Password Access 17
- COM Settings Definition 18
- The COM Settings window 19
- Signal Block Definition 20
- The Signal Blocks tab 21
- Interface Definition 23
- SW-EMAIL, for 24
- Custom Scroller Options 25
- Server Windows and Menus 27
- The Signal Analyzer Window 29
- Signal lists 30
- The value frames 30
- The Database File 32
- The Queries Table 35
- Country = "USA" 36
- Successive Queries 38
- Displaying a Successive Query 39
- Operating on Database Tables 40
- Adding a Record 41
- Updating a Record 41
- Deleting a Record 41
- Demo 1 SIMPL Windows Program 42
- Demo 1 VT Pro-e Program 42
- Demo 2 Successive Query 43
- Demo 2 SIMPL Windows Program 44
- Demo 3: AutoPick 45
- Demo 3 SIMPL Windows Program 46
- Demo 3 VT Pro-e Program 46
- Server Protocol 48
- Signal Block Enable / Disable 48
- Signal Block Error Reporting 48
- Space Considerations 50
- Multiple channels 53
- Multiple Connections 53
- The COM Settings Signal Block 53
- Appendix C: Signal Reference 54
- Error Reporting 55
- Signal Summary 55
- Signal Reference 58
- Blank scroller signal 59
- BlankAll system signal 60
- ClearRec scroller signal 61
- CloseRec scroller signal 62
- Cols scroller signal 63
- DataFilter scroller signal 65
- scroller signal 66
- DeleteRec scroller signal 67
- Enable scroller signal 69
- First scroller signal 74
- and GoLevel 75
- are valid but GoLevel 75
- or higher 75
- GoLevelEcho 76
- Last scroller signal 77
- - or - List 78
- NewRec scroller signal 79
- Next scroller signal 80
- PongSvr, PongSys 82
- Prev scroller signal 83
- Refresh scroller signal 85
- Requery scroller signal 86
- Requery All system signal 87
- Rows scroller signal 88
- ScrollBar scroller signal 89
- UpdateRec scroller signal 90
- UpLevel scroller signal 91
- WriteField 92
Philips SBCRU960/00 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Odtwarzacze DVD Philips SBCRU960/00.
Dostarczamy pdf podręczników Philips SBCRU960/00 do pobrania za darmo według typów dokumentów:
Comments to this Manuals