Crestron DigitalMedia Room Controller DM-RMC-100 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
DM-RMC-100-F DigitalMedia
Fiber Receiver & Room Controller 100
crestron.com
|
800.237.2041
SPECIFICATIONS
Video
Input Signal Type: DM
®
Fiber (DigitalMedia
over multimode fiber
optic cable)
Output Signal Types: HDMI
®
, DVI
[2]
Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support
Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz
(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,
852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz,
1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz
(720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24),
1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz,
2048x1152@60Hz, plus any other resolution allowed by HDMI up to
165MHz pixel clock
Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz
(576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus
any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
Audio
Input Signal Type: DM Fiber
Output Signal Type: HDMI
Formats: Dolby Digital
®
, Dolby Digital EX, Dolby Digital Plus,
Dolby
®
TrueHD, DTS
®
, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio
, Up to 8ch PCM
Communications
DigitalMedia: DM Fiber, HDCP management, EDID format management,
CEC
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP
USB: Supports USB HID class devices
Connectors – Bottom
SENS: (1) 2-pin 3.5mm detachable terminal block;
Digital/contact closure sensing input;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
HDMI: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI
[2]
USB: (1) USB Type A female; USB host port for connection of a mouse/
keyboard or other USB HID-compliant device
RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2)
normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
COM: (1) 5-pin 3.5mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
Connectors – Top
LAN: (1) 8-wire RJ45 female;
10Base-T/100Base-TX Ethernet port
DM INPUT, D & M: (1) DM Fiber input composed of (2) SC female optical
fiber connectors; Connects to DM Fiber output of a DM switcher,
transmitter, or other DM device via CresFiber
®
8G fiber optic cable
[1]
Ground: (1) 6-32 screw, chassis ground lug
PWR: (1) 2-pin 3.5mm detachable terminal block, 24 Volt DC power input;
PW-2407WUL power pack included
Controls & Indicators
PWR: (1) green LED, indicates operating power supplied via local
power supply
DM LINK: (1) green LED, indicates DM link status
VIDEO: (1) red/green dual-color LED, indicates video signal presence and
lock status
CNTRL: (1) red/green dual-color LED, indicates Ethernet connection and
control system communication status
DM-RMC-100-F – Top & Bottom Views
Page view 1
1 2 3 4

Comments to this Manuals

No comments