Crestron Cameo C2N-CB Series Installation Guide download pdf (Page 38)

Cameo Keypads Crestron C2N/C2NI-CB Series

34 • Cameo Keypads: C2N/C2NI-CB Series Operations & Installation Guide - DOC. 6560B

Appendix: Template for Flush Mount Hole

The following figure (not to scale) illustrates the supplied template used

to prepare the hole in the wall or other mounting surface for the flush

mount Cameo keypad.

NOTE: Use only the original template, not a photocopy, to prepare the

hole. Photocopies usually alter the size of the image slightly, which

would make the hole the wrong size.

Be careful when cutting the hole, the spring clamp on the keypad does

not have provision for positioning adjustment. Also, ensure that there is a

sufficient clearance area behind the mounting surface as shown on the

template.

2.68 in

(6.80 cm)

(2 11/16 in)

3.68 in

(9.34 cm)

(3 11/16 in)

5.38 in

(13.66 cm)

(5 3/8 in)

1.38 in

(3.50 cm)

(1 3/8 in)

2.38 in

(6.04 cm)

(2 3/8 in)

3.32 in

(8.42 cm)

(8 27/64 in)

1 2 ... 33 34 35 36 37 38 39 40

No comments

Crestron Cameo C2N-CB Series Installation Guide Page 38