Crestron DM-RMC-200-C Installation Guide download pdf (Page 9)

Crestron DM-RMC-200-C DigitalMedia 8G+™ Receiver 200

A single cable connects the DM-RMC-200-C to a DM

switcher or transmitter (each

sold separately), transporting video, audio, control, and networking signals through

one RJ-45 connection.

Multiple DM-RMC-200-Cs may be installed to handle each

display in a multi-room distribution system, all fed from a central DM switcher. Or, a

single DM-RMC-200-C can be fed straight from a DM 8G+ transmitter, affording a

simple solution for extending a computer or AV signal to a single display.

High-Definition Scaler

Through a distributed scaler approach, DigitalMedia delivers the most flexible and

user-friendly solution for routing multiple disparate sources to many different

display devices. Employing DM receivers with built-in scaling, DM allows an

independent high-performance scaler to be installed at every display device, ensuring

an optimal image on every screen. Distributed scaling allows a high-definition 3D or

high-resolution computer source to be viewed on lower resolution 2D displays

without compromising the original signal.

The DM-RMC-200-C accepts any video source from standard NTSC 480i to HD

1080p60 with Deep Color, as well as computer sources from VGA to

UXGA/WUXGA, and scales them perfectly to match the native resolution of your

video display. A range of common output resolutions is supported to work with

virtually any popular flat-panel display, projector, or computer monitor. Intelligent

frame rate conversion enables support for 24p and PAL format sources, and

3D-to-2D conversion allows 3D content to be fed simultaneously to separate 3D

and 2D displays. Setup and use of the scaler is simplified through fully automatic

operation utilizing the display’s EDID.

2, 3

Video Wall Processing

The DM-RMC-200-C also provides zoom capability on its output to display just a

portion of the source image. Using this feature, multiple units may be combined to

configure a high-definition video wall composed of up to 16 individual displays.

Configurations of 2x2, 3x2, 3x3, 4x3, or 4x4 are supported, and all that is required is

a separate DM-RMC-200-C for each display, and a DM switcher with sufficient

DM 8G+ outputs.

Audio Amplifier

The DM-RMC-200-C is equipped with stereo analog audio outputs, and a built-in

30 Watt stereo amplifier. The output volume is adjustable via a control system using

a keypad, touch screen, or handheld remote. The amplifier provides plenty of power

to drive a pair of local speakers, or use the line output to connect directly to an input

on the display device, a pair of amplified speakers, or a local AV receiver, amplifier,

or sound system.

1. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G

DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D

cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to

safeguard against unpredictable environmental electrical noise which may impact performance at

resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide

(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.

4789) for complete system design guidelines. All cable sold separately.

2. Automatically passes 3D video if display device supports it (reverts to pass-through mode

without scaling). Provides automatic 3D-to-2D conversion if display device does not support 3D.

3. EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that

enables a display device to tell the source device what resolutions and formats it can support, allowing

the source to configure itself automatically to feed the best signal that both devices can support.

Operations & Installation Guide – DOC. 7126B DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C • 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Comments to this Manuals

No comments

Tripp lite S510-18N Datový list (2 strany)

Značka: Tripp-lite | Kategorie: SCSI cables | Velikost: 0.09 MB |

Tabulka s obsahem

Model #: S510-18N

Další produkty a příručky pro Kabely SCSI Tripp Lite

Modely	Typ Dokumentu
S510-003	Datový list Tripp Lite 3 ft. SFF-8087 - SFF-8484, 2 stránky
S455-006	Datový list Tripp Lite 6-ft. VHDCI68M - HD68M, 2 stránky
S506-18N	Datový list Tripp Lite 18 in. SFF-8087 - SFF-8087, 2 stránky
S442-006	Datový list Tripp Lite 6-ft. VHDCI68M - HD50M, 2 stránky
S456-010	Datový list Tripp Lite 10-ft. Offset VHDCI68M/M, 2 stránky
S508-18N	Datový list Tripp Lite 18 in. SFF-8087 - 4 X SATA 7pin, 2 stránky
S410-006	Datový list Tripp Lite 6-ft. HD68M - HD50M, 2 stránky
S366-006	Datový list Tripp Lite 6-ft. HD50M - HD50M, 2 stránky
S404-006	Datový list Tripp Lite 6-ft. HD68M - HD68M, 2 stránky
S455-003	Datový list Tripp Lite 3-ft. VHDCI68M - HD68M, 2 stránky
S506-003	Datový list Tripp Lite 3ft SFF-8087 - SFF-8087, 2 stránky
S446-006	Datový list Tripp Lite 6-ft. VHDCI68M - VHDCI68M, 2 stránky
S454006	Datový list Tripp Lite S454006 SCSI/Fibre Channel, 2 stránky
S457-010	Datový list Tripp Lite 10-ft. VHDCI68M/M, 2 stránky
S450-010	Datový list Tripp Lite 10-ft. HD68M - HD68M, 2 stránky
S455-010	Datový list Tripp Lite 10-ft. VHDCI68M - HD68M, 2 stránky
S053-36I	Uživatelský manuál Tripp Lite s053-36i User's Manual, 2 stránky
S236-000	Uživatelský manuál Tripp Lite S236-000 User's Manual, 2 stránky
s122-000	Uživatelský manuál Tripp Lite s122-000 User's Manual, 2 stránky

Crestron DM-RMC-200-C Installation Guide Page 9

Comments to this Manuals

Tripp Lite S510-18N manuály

Tripp lite S510-18N Datový list (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Kabely SCSI Tripp Lite

Crestron DM-RMC-200-C Installation Guide Page 9

Comments to this Manuals

Related products and manuals for Receiver Crestron DM-RMC-200-C

Tripp Lite S510-18N manuály

Tripp lite S510-18N Datový list (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Kabely SCSI Tripp Lite