Crestron DM-RMC-200-S User Manual download pdf (Page 4)

DM-RMC-200-S DigitalMedia 8G

™

Fiber Receiver & Room Controller 200

crestron.com

800.237.2041

RS-232: 2-way device control and monitoring up to 115.2k baud with

hardware and software handshaking

IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial

TTL/RS-232 (0-5 Volts) up to 19.2k baud

DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet

HDMI: HDCP, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management

of CEC between the connected HDMI device and a control system

Connectors – Bottom

DIG IN: (1) 2-pin 3.5mm detachable terminal block;

Digital/contact closure sensing input;

Rated for 0-24 Volts DC, referenced to GND;

Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;

Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band

HDMI OUT: (1) 19-pin Type A HDMI female;

HDMI digital video/audio output;

Also supports DVI

[2]

USB HID: (1) USB Type A female, USB 2.0 host port for connection of a

mouse/keyboard or other USB HID-compliant device

COM: (1) 5-pin 3.5mm detachable terminal block;

Bidirectional RS-232 port;

Up to 115.2k baud, hardware and software handshaking support

IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2)

IR/Serial ports;

IR output up to 1.1 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud

Connectors – Top

AUDIO OUT R, L (Speaker): (2) 2-pin 5mm detachable terminal blocks;

Left & Right speaker-level audio outputs

[5]

;

Paralleled with rear panel AUDIO OUT connectors;

Wire Size: Connector accepts 12 AWG maximum;

Output Power: 15 Watts per channel at 8 Ohms

AUDIO OUT R, L (Line): (2) RCA female;

Stereo unbalanced line-level audio output

[5]

;

Output Level: 2 Vrms maximum;

Output Impedance: 100 Ohms nominal

DM IN MMF/SC: (1) SC female optical fiber connector;

DM 8G Fiber input;

Connects to DM 8G Fiber output of a DM switcher, transmitter, or other DM

device via CresFiber

8G fiber optic cable

[1]

LAN: (1) 8-wire RJ45 female, shielded;

10Base-T/100Base-TX Ethernet port

24VDC 2.0A MAX: (1) 2.1 x 5.5 mm DC power connector;

24 Volt DC power input;

PW-2420RU power pack included

Connectors – Rear

G: (1) 6-32 screw, chassis ground lug

AUDIO OUT L, R (Speaker): (2) 2-pin 5mm detachable terminal blocks;

Left & Right speaker-level audio outputs

[5]

;

Paralleled with top panel AUDIO OUT (Speaker) connectors;

Wire Size: Connector accepts 12 AWG maximum;

Output Power: 15 Watts per channel at 8 Ohms

RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2)

normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

DIG IN: (1) 2-pin 3.5mm detachable terminal block;

Digital/contact closure sensing input;

Rated for 0-24 Volts DC, referenced to GND;

Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;

Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band

Controls & Indicators

PWR: (1) green LED, indicates operating power supplied via local

power pack

DM LINK: (1) green LED, indicates DM link status

VIDEO: (1) green LED, indicates video signal presence and lock status

USB HID: (1) green LED, indicates a valid device connection and activity

on the USB HID port

SETUP: (1) red LED and (1) miniature recessed pushbutton, for

Ethernet setup

RESET: (1) miniature recessed pushbutton, for hardware reset

DM IN (Top): (1) green LED, indicates DM link status

LAN (Top): (2) LEDs, green LED indicates Ethernet link status, amber LED

indicates Ethernet activity

Power Requirements

Power Pack: 2 Amps @ 24 Volts DC;

100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation:

Power amp off, no relay or USB loads: 60 BTU/Hr;

Power amp on, with relay and USB loads: 80 BTU/Hr (maximum)

Enclosure

Chassis: Metal, black finish, vented sides and front

Mounting: Mounts to a 2-gang electrical box, 2-Gang UK (BS 4662)

electrical box, or 2-Gang European (DIN 49073) electrical box; bracket

includes holder for the included power pack

1 2 3 4 5 6

Comments to this Manuals

No comments

Crestron DM-RMC-200-S User Manual Page 4

Comments to this Manuals

Related products and manuals for Receiver Crestron DM-RMC-200-S