Crestron DM-RX1-1G Specifications download pdf (Page 30)

Crestron DigitalMedia™ Design Guide

26 Check website (www.crestron.com) for product availability

Step 2: Select DigitalMedia Equipment

Switcher Chassis

There are two DigitalMedia switcher card frames available, 8X8 and 16X16.

Each switcher permits inputs to be cascaded up to four additional switchers, increasing the number of available outputs in the

system. For example, using five DM-MD16X16 switchers in a system permits a total of 80 available outputs.

 The DM-MD8X8 ships without cards; you must order both input and output cards

 The DM-MD16X16 is supplied pre-loaded with output cards of your selected configurations (fiber, DM CAT with

HDMI, HDMI with Stereo Audio, refer to page 30 for details). Input cards are ordered separately. Check the Crestron

website for available models.

DM-MD8X8

 Eight input card slots (field upgradable)

 Two output module slots with four outputs on each module (field upgradable)

 Full audio and USB breakaway

NOTE: DMNet™ uses the same physical connectors as Cresnet

, but the two protocols are not compatible. Be sure you do not

cross-wire DMNet and Cresnet.

NOTE: The EIG connector on the DM product switchers is used to jumper in external power (in the same manner as the PAC2).

The switchers provide enough power (55 watts) for eight room solution boxes and five repeaters, so additional power is rarely

required.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

No comments

Crestron DM-RX1-1G Specifications Page 30