Crestron iMedia IM-RX3 Installation Guide download pdf (Page 28)

IMedia Receiver/Processor Crestron IM-RX1 & IM-RX3

The Wizard will then begin the file transfer. A progress bar will be displayed as

the files are transferred. After transfer the Wizard will display information about

each file, including the filename and transfer status.

“Upload Status” Window

Communication Settings

The Communications Settings button on the “Finish” window provides access

to three additional adjustments areas, Communication Settings, Set IP

Information, and Set/Clear XPanel Password.

Communication Settings…

You must establish a valid connection to the IM-RX receiver before you can

upload configuration files or XPanel projects. This is accomplished using either

a serial (RS-232) or TCP/IP connection.

For RS-232 communication, use a DB9 straight-through serial cable to connect

the COMPUTER port on the IM-RX to one of the COM ports on the PC.

For a TCP/IP connection, use Ethernet straight-through cables to connect the PC

and the IM-RX1/IM-RX3 to the Ethernet network.

Once your connection is in place, you can click the Communication Settings…

button on the “Finish” window to open the Address Book and start a session

with the IM-RX.

If you have not already done so, you must first add the RS-232 address or the IP

address of the receiver to the Address Book.

The Address Book allows you to maintain a list of control systems and network

devices. The address book is saved as an .adr file, allowing you to easily share

address files with other programmers, edit or remove addresses, and import

addresses into an existing Address Book.

You can establish a session with any or all of the devices in the Address Book

(provided the PC has a valid connection to the Cresnet/Ethernet network).

24 • iMedia Receiver/Processor: IM-RX1 & IM-RX3 Operations & Installation Guide - DOC. 6384

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Crestron iMedia IM-RX3 Installation Guide Page 28