Crestron CNRACKX-DP Specifications download pdf (Page 25)

Crestron CNRACKX-DP CNX Dual Processor Modular Control System

5. From the Setup menu, verify that Auto Baud Search is checked. Refer

to illustration below.

Verifying Auto Baud Search

6. While the Viewport is displayed, select Setup | Communications

(alternatively, depress Alt+D) to open the Port Settings dialog box and

refer to the illustration below.

Accessing the Port Settings Dialog Box

7. Select the appropriate connection type (RS-232 for a PC connection

through the COMPUTER port of the CNRACKX-DP or CNXCPU or

TCP/IP through the Ethernet via optional LAN/DPA ports). Verify that

the proper COM port is selected. Set the baud rate to 38400, the parity

to None, the data bits to Eight, and the stop bits to One. Refer to the

dialog box shown below for the remaining settings. Click on the OK

button to save the settings and close the dialog box.

Operations Guide - DOC. 8151 CNX Dual Processor Modular Control System: CNRACKX-DP • 21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

No comments

Crestron CNRACKX-DP Specifications Page 25