Crestron BB-5000 User Manual download pdf (Page 6)

Back Box Crestron

BB-5000

Installation

There are at least two different methods of installing the BB-5000. The construction

method is initiated during the construction process. Use this method to wall mount

either a Crestron Series 4500 or Series 5000 Lectern/Wall Mount Touchpanel to a

wall stud. Installation begins at a time when the rooms in which the panel is to be

installed are framed and the gypsum board has not been hung. The post-construction

method is preferred for wall mounting when the rooms are complete and the gypsum

board has already been hung. The post-construction method is also desirable when

lectern mounting the panel.

Construction Method

The only equipment and tools required are three #6 mounting screws (or equivalent),

a drill with adjustable torque, a #2 Phillips tip bit, a 5/16” drill bit, and a #20 drill bit.

Complete the following installation procedure in the order provided.

1. Remove necessary knockout(s) from metal electrical box.

2. Use six pan head screws (1/2” length), supplied, to loosely secure two

metal brackets to the back box.

Attaching Two Metal Brackets to the Back Box

PAN

HEAD

SCREWS

METAL

BRACKETS

3. Position the metal electrical box to the stud. If

" gypsum board is

used, be sure that ½" of the box protrudes from the stud as illustrated in

the metal electrical box cut away shown after this step.

2 • Back Box: BB-5000 Installation Guide - DOC. 5827A

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Crestron BB-5000 User Manual Page 6