Crestron TPS-4500LV Specifications download pdf (Page 13)

Crestron TPS-4500V & TPS-4500LV 12 Inch Tilt/Lectern Touchpanels

Setup

Network Wiring

CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to

do so could cause equipment damage or void the Crestron warranty.

CAUTION: Possible equipment damage if miswired.

NOTE: When installing network wiring, refer to the latest revision of the wiring

diagram(s) appropriate to your specific system configuration, available from the

Downloads | Product Manuals | Wiring Diagrams section of the Crestron website

(www.crestron.com).

NOTE: Do not power up system until all wiring is verified. Care should be taken to

ensure data (Y, Z) and power (24, G) connections are not crossed.

NOTE: All network wiring must consist of two twisted-pairs. One twisted pair is

the +24V conductor and the GND conductor and the other twisted pair is the Y

conductor and the Z conductor.

When calculating the wire gauge for a particular Cresnet run, the length of the run

and the power factor of each Cresnet unit to be connected must be taken into

consideration. If Cresnet units are to be daisy-chained on the run, the power factor of

each network unit to be daisy-chained must be added together to determine the

power factor of the entire chain. The length of the run in feet and the power factor of

the run should be used in the following resistance equation to calculate the value on

the right side of the equation.

Resistance Equation

R = Resistance (refer to table below).

L = Length of run (or chain) in feet.

PF = Power factor of entire run (or chain).

R <

L x PF

40,000

Where:

The required wire gauge should be chosen such that the resistance value is less than

the value calculated in the resistance equation. Refer to the table after this paragraph.

Wire Gauge Values

RESISTANCE (R) WIRE GAUGE

Doubled CAT5

8.7

Tripled CAT5

NOTE: All network wiring must consist of two twisted pairs. One twisted pair is

the +24V conductor and the GND conductor. The other twisted pair is the Y and Z

conductors.

Operations Guide - DOC. 6160 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Comments to this Manuals

No comments

Samsung B5353 Bedienungsanleitung (1 Seiten)

Marke: Samsung | Kategorie: Video surveillance systems | Größe: 0.40 MB |

Inhaltsverzeichnis

SCC-B5352/B5353

SCC-B5354/B5355

SCC-B5392/B5393

SCC-B5394/B5395

Weitere Produkte und Handbücher für Videoüberwachungssysteme Samsung

Modelle	Dokumententyp
SCC-C6403	Bedienungsanleitung Samsung SCC-C6403 User Manual, 29 Seiten
SNC-M300	Bedienungsanleitung Samsung SNC-M300 User Manual, 1 Seiten
SNC-C6225	Bedienungsanleitung Samsung SNC-C6225 User Manual, 76 Seiten
SSC-C6433	Bedienungsanleitung Samsung SSC-C6433 User Manual, 1 Seiten
SID-560	Bedienungsanleitung Samsung SID-560 User Manual, 22 Seiten
SCC-C6405(P)	Bedienungsanleitung Samsung SCC-C6405(P) User Manual, 31 Seiten
SPD-3750T	Bedienungsanleitung Samsung SPD-3750T User Manual, 41 Seiten
SNC-B2335	Bedienungsanleitung Samsung SNC-B2335 User Manual, 1 Seiten
SCC-C7439	Bedienungsanleitung Samsung SCC-C7439 User Manual, 1 Seiten
SCC-B5394	Bedienungsanleitung Samsung SCC-B5394 User Manual, 131 Seiten
SPD-1000	Bedienungsanleitung Samsung SPD-1000 User Manual, 32 Seiten
SCC-C4353	Bedienungsanleitung Samsung SCC-C4353 User Manual [de] , 37 Seiten
SCC-643(P)	Bedienungsanleitung Samsung SCC-643(P) User Manual, 140 Seiten
SCC-B5342	Bedienungsanleitung Samsung SCC-B5342 User Manual, 16 Seiten
MINI SMART SCC-C7325	Bedienungsanleitung Samsung MINI SMART SCC-C7325 User Manual, 43 Seiten
SCC-641P	Bedienungsanleitung Samsung SCC-641P User Manual [ru] [de] , 1 Seiten
SVD-4600	Bedienungsanleitung Samsung SVD-4600 User Manual, 17 Seiten
SCC-641	Bedienungsanleitung Samsung SCC-641 User Manual, 1 Seiten
SCC-B5335	Bedienungsanleitung Samsung SCC-B5335 User Manual, 34 Seiten
SCC-B535x(S)	Bedienungsanleitung Samsung SCC-B535x(S) User Manual [ru] , 65 Seiten