Crestron WMKM-4L User Manual download pdf (Page 9)

Crestron MMK-4L & WMKM-4L Mud Mount Kits

Touchpanel Mounting Using MMK-4L – Exploded View

TPS-4L

TPS-4L MOUNTING SCREWS

(4) #04-40 x 2"

(2018793)

DRYWALL SCREWS

(NOT INCLUDED)

MUD RING

(2013240)

DRYWALL

ADJUSTMENT PLATES (2)

(2013243)

PMK-4L

PUSH – ON

FASTENERS (4)

(2004121)

WMKM-4L Procedure

This section provides the necessary steps for the assembly and installation of the

WMKM-4L into a wall. Review the procedure and complete the steps in the order

provided. The only tools or materials required and not supplied are a drywall saw or

equivalent, a level, four standard drywall screws, #2 Phillips screwdriver and

tools/material to apply drywall joint compound.

CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity

above and below the touchpanel for heat dissipation.

1. Insert the two pins on one adjustment plate into the top two outer holes on

the mounting plate, as shown in the illustration on the following page.

Installation Guide – DOC. 6389A Mud Mount Kits: MMK-4L & WMKM-4L • 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Crestron WMKM-4L User Manual Page 9