Crestron HD-SCALER Installation Guide download pdf (Page 25)

Crestron HD-SCALER High-Definition Video Scaler

Operations & Installation Guide – DOC. 7136B High-Definition Video Scaler: HD-SCALER

•

IR Remote Buttons (Continued)

BUTTON DESCRIPTION

EDID

DFLT/COPY

Specifies whether the analog/digital input EDID is

to be set to DFLT in which the HD-SCALER

sends a list of default resolutions to the source or

set to COPY in which resolutions are read from

the display and sent to the source.

NOTE: If RGB video has been selected by

pressing the RGB video button on the remote,

then the analog input EDID is set. If digital video

has been selected by pressing the HDMI video

button on the remote, then the digital input EDID

is set.

ASPECT

1:1/NORM/ZOOM/STRCH

Specifies one of the following:

• 1:1: Matches the resolution of the image on

the display with the input resolution of the

source image. For example, if the output

resolution is 1080p and the input resolution is

640x480, the resolution of the image on the

display is 640x480 with a black bar

surrounding it. If the image size is larger than

the total resolution of the display, the image is

cropped to the size of the display.

• NORM: Fits the source image within the

display while maintaining the aspect ratio of

the image on the display. If the source image

is smaller than the total resolution of the

display, the image is enlarged to fit the

display. If the source image is larger than the

total resolution of the display, the image is

reduced to fit the display.

• ZOOM: Zooms in on the image while

maintaining the aspect ratio. Cropping of the

image may occur.

• STRCH: Depending on the input and output

resolutions, stretches the image horizontally,

vertically, or both horizontally and vertically to

fill the display. The aspect ratio of the image

is not maintained.

AUDIO

AUTO/ALOG/HDMI

Specifies one of the following:

• AUTO: Automatically detects the audio input

source: analog, HDMI (digital), or both. If both

analog and HDMI audio inputs are detected,

HDMI is selected as the preferred audio

setting.

• ALOG: Sets the audio to analog.

• HDMI: Sets the audio to HDMI (digital).

VIDEO

AUTO/RGB/HDMI

Specifies one of the following:

• AUTO: Automatically detects the video input

source: RGB (analog), HDMI (digital), or both.

If both RGB and HDMI video inputs are

detected, HDMI is selected as the preferred

video setting.

• RGB: Sets the video to RGB (analog).

• HDMI: Set the video to HDMI (digital).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Crestron HD-SCALER Installation Guide Page 25

Comments to this Manuals

Related products and manuals for Video converters Crestron HD-SCALER