Crestron CLS-C6 Specifications download pdf (Page 1)

CLS-EXP-DIMFLV

Crestron Electronics, Inc. Installation Guide – DOC. 6680B

15 Volvo Drive Rockleigh, NJ 07647 (2020652)

Tel: 888.CRESTRON

06.14

Fax: 201.767.7576

Specifications subject to

www.crestron.com

change without notice.

Functional Summary

The CLS-EXP-DIMFLV enables the expansion of

Crestron

iLux

Integrated Lighting System (CLS-C6

Series) and other Crestron lighting dimmers to allow

control of 0-10 volt fluorescent dimming ballasts. It can

also be used to switch non-dimmable loads including

LED, incandescent, MLV, ELV, HID, fluorescent

ballasts, and motors. A single model supports 120, 230, or

277 volt loads up to 16 amps.

Any output channel of the iLux system can be used to

control the CLS-EXP-DIMFLV to dim a fully loaded

circuit. It is also compatible with CLW-Series

in-wall

dimmers and select CLX-Series lighting control

modules.

The metal enclosure is designed for mounting

to a vertical surface

and can be installed in an

environmental air-handling space above a suspended

ceiling. Conduit knockouts are provided on the bottom

and lower sides. All connections are made via screw

terminals behind the front cover.

CLS-EXP-DIMFLV Physical View

1. CLW-Series device must have a dedicated neutral.

2. Compatible only with forward-phase dimming modules.

3. Must be oriented upright, mounted to a vertical surface, with

6 inches (153 mm) minimum spacing above and below for proper

ventilation and heat dissipation.

Specifications

CLS-EXP-DIMFLV Specifications

SPECIFICATION DETAILS

Load Ratings

Dimmer Channels

Load Ratings

Lamp

Motor

Minimum Load

at 120 volts

at 230 volts

at 277 volts

Load Types

Dimmable Load

Switch Load

16 amps @ 120–277 volts

(70 mA max current sink for 0-10

Vdc ballasts)

1/2 HP @ 120 volts;

1 HP @ 230/277 volts

15 watts

25 watts

30 watts

0-10 Vdc dimmable fluorescent

ballasts, Advance Mark 7 or other

compliant with specifications for

control by dc voltage per ANSI

C82.11:2002 and IEC60929:2006

LED, incandescent, fluorescent,

magnetic low voltage, electronic

low voltage, neon/cold cathode,

high-intensity discharge (HID),

motors

Input Voltages

Line Power

Control Input

120–277 Vac, 50/60 Hz

120–230 Vac, 50/60 Hz, phase

independent of line power and

load;

Presents a 25 watt load to the

controlling device

Electrical Terminals

Captive screw type;

Accommodates two 22-12 AWG

(0.34-4.0 mm

) wires

Enclosure

Surface mount module with (2)

integral mounting flanges,

galvanized steel with gray matte

powder coat front panel, extruded

aluminum heat sink, 1/2 in

(13 mm) and 3/4 in (20 mm)

conduit knockouts provided on

bottom and lower left and right

sides

Environmental

Temperature

Humidity

Maximum Heat

Dissipation

32° to 104°F (0° to 40°C)

10% to 90% RH (non-condensing)

70 Btu/h at maximum load,

16 amps

Dimensions

Height

Width

Depth

8.82 in (224 mm)

6.39 in (163 mm)

3.18 in (81 mm)

Weight 3.3 lbs (1.5 kg)

Maximum Expansion

Modules per Controller

Output

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Specifications

CLS-EXP-DIMFLV Crestron Electronics, Inc. Installation Guide – DOC. 6680B 15 Volvo Drive Rockleigh, NJ 07647 (2020652) Tel: 888.CRESTRON 06.14

Page 2

Crestron CLS-EXP-DIMFLV iLux Dimmer Expansion Module 2 • iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV Installation Guide – DOC.

Page 3 - Application

iLux Dimmer Expansion Module Crestron CLS-EXP-DIMFLV Installation Guide – DOC. 6680B iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV

Page 4 - Physical Description

Crestron CLS-EXP-DIMFLV iLux Dimmer Expansion Module 4 • iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV Installation Guide – DOC.

Page 5 - Installation

iLux Dimmer Expansion Module Crestron CLS-EXP-DIMFLV Installation Guide – DOC. 6680B iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV

Page 6 - Hardware Hookup

Crestron CLS-EXP-DIMFLV iLux Dimmer Expansion Module 6 • iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV Installation Guide – DOC.

Page 7 - Problem Solving

iLux Dimmer Expansion Module Crestron CLS-EXP-DIMFLV Installation Guide – DOC. 6680B iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV

Page 8 - Return and Warranty Policies

Crestron CLS-EXP-DIMFLV iLux Dimmer Expansion Module 8 • iLux 0-10V Fluorescent Dimmer Expansion Module: CLS-EXP-DIMFLV Installation Guide – DOC.

Crestron CLS-C6 Specifications Page 1

Browse online or download Specifications for Dimmers Crestron CLS-C6. Crestron CLS-C6 Specifications User Manual

Summary of Contents

More documents for Dimmers Crestron CLS-C6

Comments to this Manuals

Crestron CLS-C6 Specifications Page 1

Browse online or download Specifications for Dimmers Crestron CLS-C6. Crestron CLS-C6 Specifications User Manual

Summary of Contents

More documents for Dimmers Crestron CLS-C6

Comments to this Manuals

Related products and manuals for Dimmers Crestron CLS-C6