Crestron ST-DSN Specifications download pdf (Page 14)

1-Way Wireless RF Touchpanel Crestron ST-1700C

POWER DOWN timeout turns off all power when the touchpanel is inactive for the

specified time. When the touchpanel is activated, either the first page of the project

appears or the last screen to be displayed reappears, depending on the setting of the

Power Up On Last Page option on the Startup Preference screen. The specified time

is displayed in minutes. The default POWER DOWN timeout is 30 minutes.

NOTE: Power Down Timeout should be set low to maximize battery life. However,

Power Down Timeout should be set greater than Standby Timeout. Otherwise, the

Standby Timeout is meaningless.

NOTE: When the panel is powered down, it will take about 1.5 seconds to power up

and respond to a button press. There is no such delay from Standby mode.

NOTE: If the external AC power pack is attached to the touchpanel and plugged

into an active AC receptacle, or if the touchpanel is resting in the docking station

(ST-DSN) and plugged into an active AC receptacle, the panel does not power down

when the power down timeout is achieved. Recall that the purpose of this timeout is

to maximize battery life. Standby timeout still functions.

Press Return to save the settings and return to the SETUP MENU.

Diagnostics Menu

DIAGNOSTICS MENU

The Diagnostics button from the MAIN MENU should only be used under

supervision from a Crestron customer service representative during telephone

support. Many options available from the DIAGNOSTICS MENU, shown to the left,

are numeric in nature and their interpretation is beyond the scope of this manual.

General Use and Safety

WARNING: To avoid shock hazard and possible damage to the unit, do not use the

touchpanel in the rain or expose it to unnecessary moisture.

Recommended Touchpanel Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could

degrade optical properties. Long-term contact with abrasive materials can scratch the

surface that may detrimentally affect image quality.

For best cleaning results, use a clean, damp, non-abrasive cloth with any

commercially available non-ammonia glass cleaner. Surrounding plastic enclosure

may not provide a complete watertight seal. Therefore, apply cleaning solution to the

cloth rather than the surface of the touchscreen. Wipe touchscreen clean and avoid

ingress of moisture beneath panels.

10 • 1-Way Wireless RF Touchpanel: ST-1700C Operations Guide – DOC. 6225A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Crestron ST-DSN Specifications Page 14