Crestron ST-DSN Specifications download pdf (Page 25)

Crestron ST-1700C 1-Way Wireless RF Touchpanel

sequence, but the only information that is actually transmitted to the control system

is the join number of the button that specifies the sequence. On the touchpanel, if

timing is specified in the sequence, the button that specifies the sequence will appear

active for the whole sequence; the other buttons in the sequence will go active in the

order and for the duration specified in the sequence; if no timing is specified, the

other buttons will go active simultaneously.

The programmer must duplicate the actual logic, including all button presses,

functions and durations, on the control system. Normally, the programmer uses a

STEPPER symbol in SIMPL Windows, with the input driven by the join number that

initiates the sequence. As shown in the following figure, each output of the

STEPPER drives the logic for the next step in the sequence with the appropriate

duration and delay as the corresponding parameters.

delay

duration

STEPPER

To Each Step of

the Sequence

delay

duration

delay

duration

delay

duration

Optional Pushbuttons

Pushbutton Layout and Join

Number Assignment

If the optional ten “hard” pushbuttons are installed, you can use these buttons to

access any frequently used commands (refer to “Appendix: Installation of Optional

Pushbuttons”). Each button has a permanently fixed digital join number; refer to the

illustration shown to the left. The sequence of digital join numbers is (top to bottom)

1 through 5 on the left side and 6 through 10 on the right side.

NOTE: A user may not want the display to come on after a pushbutton is pressed

when the unit is off. The Startup Preference option allows the user to select whether

the touchpanel’s display comes on or stays off after a pushbutton is pressed. For

more information, refer to “Startup Preference” on page 9.

NOTE: To program a quick pushbutton to flip a page (change a screen) on the

ST-1700C, go to the Hard Keys tab of the “Project Properties” window in VT Pro-e.

Select a button from the Button drop-down list, and then select the desired page from

the Page Flip drop-down list. When the button is pressed, the page is displayed.

The quick pushbuttons can also be programmed to do a page flip via SIMPL

Windows.

Reserved Join Numbers

A reserved join number is a feature of the software that enables a designer to create a

button that completes a predetermined function (e.g., calls up the Preferences Menu,

adjusts brightness, etc.). The table after this paragraph provides a list of reserved join

numbers available within SIMPL Windows software.

Operations Guide – DOC. 6225A 1-Way Wireless RF Touchpanel: ST-1700C • 21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Comments to this Manuals

No comments

Crestron ST-DSN Specifications Page 25

Comments to this Manuals

Related products and manuals for Mobile device dock stations Crestron ST-DSN