Crestron STRFGWX Specifications download pdf (Page 10)

2-Way RF Compact Color Touchpanel Crestron STX-1550C

RF CHANNEL

Each STX-1550C touchpanel communicating to the STRFGWX transceiver must

have a RF CHANNEL that matches the RF CHANNEL of the STRFGWX. There

are 16 possible RF CHANNELS ranging from 0 to F (hexadecimal number). The RF

CHANNEL of the touchpanel must match the RF CHANNEL assigned to the

STRFGWX.

NOTE: A single RF CHANNEL may be used by more than one STRFGWX when

multiple transceivers are used to expand the roaming capabilities of a touchpanel.

Refer to the latest revision of STRFGWX Operations Guide (Doc. 5811) for further

information. The latest version can be obtained from the Downloads page

(MANUAL Library) of Crestron’s website (www.crestron.com)

. New users are

required to register in order to obtain access to the FTP site.

RF ID

Every STX-1550C touchpanel communicating with a Cresnet control system via a

STRFGWX requires a unique RF ID to secure RF communications. There are 15

useable codes for multiple touchpanel(s) ranging from 01 to 0F (hexadecimal

number). The RF ID of the unit must match the RF ID specified in the SIMPL

Windows program.

NOTE: Do not set the RF ID to “0”; it is not supported in SIMPL Windows.

Configuring the Touchpanel

To configure the touchpanel, it is necessary to access a series of setup screens prior

to viewing run-time screens that are loaded into the touchpanel for normal operation.

The Main Menu for configuring the touchpanel appears when a finger is held to the

touchscreen as power is applied. Remove your finger when the message “SETUP

MODE” appears on the touchscreen. Holding a finger to the touchscreen for five

seconds after the “SETUP MODE” message is displayed sets the brightness to high.

Main Menu

Upon entering SETUP MODE, the Main Menu, shown to the left, displays four

buttons: TOUCH SCREEN CALIBRATION, DIAGNOSTICS, SETUP, and

SAVE SETUP AND RUN PROGRAM.

The Save Setup and Run Program button, located at the upper right corner of the

Main Menu, saves all of the setup information to EEPROM and displays the main

page that has been programmed into the system. The remaining buttons on the Main

Menu open other menus, which are discussed in subsequent paragraphs.

Calibration Menu

Touchscreen Calibration Menu

Calibration of the touchscreen is required if the active touch area of a button does

not coincide with the button’s image. Select the TOUCH SCREEN

CALIBRATION button on the Main Menu to display the Calibration Menu, shown

to the left. The Calibration Menu offers the choice to initiate calibration with the

Perform Calibration button or return to the previous screen with the Return to

Main Menu button. Choose an option by touching the correct button.

6 • 2-Way RF Compact Color Touchpanel: STX-1550C Operations Guide - DOC. 5812A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Crestron STRFGWX Specifications Page 10

Comments to this Manuals

Related products and manuals for Mobile device dock stations Crestron STRFGWX