Crestron CLW-SLVS1RF Specifications

Browse online or download Specifications for Network switches Crestron CLW-SLVS1RF. Crestron CLW-SLVS1RF Specifications User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Operations Guide

Crestron CLW-SW1/4RF, CLW-SWS1/4RF, CLW-SLVS1RF infiNET™ Switches Operations Guide

Page 2

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Physical View of CLW-SW4RF/-SWS4RF (Clockwise from Top; Top, Side, and Front) RUN SET OFF

Page 3 - Contents

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Left to Right, CLW-SW1RF/-SWS1RF, CLW-SW4RF/-SWS4RF, and CLW-SLVS1RF; Shown in White

Page 4

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Acquire the Switch on the infiNET Network Before an infiNET device can be used on an infi

Page 5 - -SLVS1RF

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches 3. Take the C2N-MNETGW out of the Acquire mode once all devices have been acquired. Refer

Page 6 - Part Number Shown

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Operation NOTE: The device may be warm to the touch during operation. This is normal. Mo

Page 7 - Specifications

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches • SET When the mode selection switch is in the “SET” position, it is operating in the SET

Page 8 - Physical Description

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Switch Operation & LED Behavior LED BEHAVIOR DEVICE STATE LOW In RUN mode, operating

Page 9 - Parts of CLW-SW4RF, -SWS4RF

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Identity Code Just like every device on a Cresnet system requires a unique identity code (

Page 10 - RUN SET OFF

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF The infiNET switch and dimmers have already been acquired as described in the acquiring p

Page 11 - Industry Compliance

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches SMW Program Tree Devices with NET IDs or MNET IDs that have been identified by the SMW Pr

Page 12

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1

Page 13

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 4. In the SMW Program Tree, right-click on the top level of the tree and select Link wit

Page 14 - Operation

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Setup Lighting Window The listed devices can be sorted in ascending or descending order b

Page 15

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF The LEDs on all of the CLW-DIM1RF dimmers on the list will flash. 9. Physically locate t

Page 16 - LED BEHAVIOR DEVICE STATE

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Setup Complete 11. Click Close to close the window once all devices have been identified.

Page 17 - Identity Code

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 2. Open the Network Device Tree and connect to the control system to verify that the gat

Page 18 - Network Device Tree

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches 4. Select a new MNET ID and press Enter. Enter New MNET ID Repeat this procedure for eac

Page 19 - SMW Program Tree

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Programming Software Have a question or comment about Crestron software? Answers to freq

Page 20

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Programming with D3 Pro Crestron’s D3 Pro lighting software provides all the tools necessa

Page 21 - Setup Lighting Window

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • The system tree of the control system displays the device in the appropriate slot with

Page 22 - Duplicate MNET ID Warning

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches • The MNET ID specified in the SIMPL Windows program must match the MNET ID of each unit.

Page 23 - Setup Complete

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Contents infiNET™ Switches: CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 1 Introduction ...

Page 24

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Uploading and Upgrading Crestron recommends using the latest programming software and tha

Page 25 - Enter New MNET ID

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Firmware Check the Crestron website to find the latest firmware. (New users may be requir

Page 26 - Programming Software

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Problem Solving Troubleshooting The table after this paragraph provides corrective action

Page 27 - Programming with D3 Pro

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches infiNET Switch Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION I

Page 28

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF To enter the bootloader, set the mode selection switch to “OFF”. Press and hold the up bu

Page 29 - Example Program

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may b

Page 30 - Uploading and Upgrading

Crestron Electronics, Inc. Operations Guide – DOC. 6397A 15 Volvo Drive Rockleigh, NJ 07

Page 32 - Problem Solving

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches infiNET™ Switches: CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Introduction Features and Functions

Page 33 - Bootloader

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET Gateway and, if more devices are needed, more C2N-MNETGW gateways may be added to

Page 34 - Future Updates

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Specifications Following are specifications for the -SW1RF, -SW4RF, -SWS1RF, -SWS4RF, and

Page 35 - Return and Warranty Policies

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF CLW-SW1/4RF, CLW-SWS1/4RF, & CLW-SLVS1RF Specifications (continued) SPECIFICATION DET

Page 36

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Physical View of CLW-SW1RF/-SWS1RF (Clockwise from Top; Top, Side, and Front) 1.75 in(4.45

Comments to this Manuals

No comments