Crestron AV2 Specifications download pdf (Page 26)

2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2

c. Set the baud rate of the AV2/PRO2 control system to 115200, as

follows:

- Press and release the HWR button on the unit’s front panel.

- Press and hold the SWR button for approximately three to five

seconds. The Viewport console should display the following

message:

Viewport Message

- Release the SWR button.

d. If communication still cannot be established:

- Remove power from the control system.

- Press and hold the SWR button on the front panel of the

AV2/PRO2.

- Reapply power to the control system.

- The Viewport console should display the message shown

above.

- Release the SWR button.

e. Select Set Baud Rate on the Viewport Functions menu (or press

F8) and choose any baud rate from the drop-down list. This will

attempt to establish a connection at the indicated baud rate. If the

connection is successful, both the PC and the control system will

be set to the new baud rate.

f. Reinitialize the unit by recycling the power or pressing the HWR

button. If the connection is established, the Viewport console

should display some text and the <AV2> or <PRO2> prompt.

g. If communication still cannot be established, contact Crestron

customer service.

Compiling and Uploading a Program to the Control

System

After you have completed your SIMPL Windows program you must compile and

upload the program to the control system.

To compile the program, simply click the Convert/Compile button

on the

SIMPL Windows toolbar, or select Project | Convert/Compile (you can also press

F12). A status bar will indicate the progress of the compile operation. After the

operation is complete, a window will display information about the program such as

the number and type of signals, and memory usage.

The compiled program will be stored as an SPZ file in the same directory as the

source file. There are a number of ways to upload an SPZ file to the control system.

1. Immediately after compiling the program you have the option to transfer

the file to the control system.

22 • Integrated Dual Bus Control System: AV2 & PRO2 Operations Guide - DOC. 5957A

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

No comments

Crestron AV2 Specifications Page 26