Crestron AV2 Specifications download pdf (Page 46)

2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2

Select Format Type Screen

Once the BIN, ASCII, or HEX menu function button is selected, the display

provides the T/R Screen. The Data Menu in the CNX Series control system

contained a RESET and REFRESH menu function button. These buttons are not

necessary for the PRO2, because the data is always 'live'. A buffer constantly records

and recycles the data. The buffer is empty when the COM port is first selected and

remains empty until data is transmitted or received.

When the port is active, data information races across the T/R Screen; a sample is

shown after this paragraph. The transmission and reception traffic is displayed in

alternating sequence to facilitate diagnostics. Depressing any of the six-menu

function buttons 'freezes' the data information. The up and down menu selection

buttons to the right of the LCD screen may be used to advance or reverse the frozen

data. Compare the data to expected manufacturer's protocol for the communicating

device.

NOTE: Data in the 'freeze' state is denoted by a lower case letter (f) in front on the

T and R in the T/R/Screen.

NOTE: Any of the six-menu function buttons toggles the 'freeze' state.

NOTE: The buffer recycles data even when in the 'freeze' state. When the screen is

unfrozen, the display jumps to the end of the buffer.

T/R Screen with Frozen Sample

42 • Integrated Dual Bus Control System: AV2 & PRO2 Operations Guide - DOC. 5957A

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

No comments

Crestron AV2 Specifications Page 46