Crestron C2N-RTHS Installation Guide download pdf (Page 16)

Temperature and Humidity Sensor, Cresnet

Crestron C2N-RTHS

Uploading and Upgrading

Crestron recommends using the latest programming software and that

each device contains the latest firmware to take advantage of the most

recently released features. However, before attempting to upload or

upgrade it is necessary to establish communication. Once communication

has been established, files (for example, programs, or firmware) can be

transferred to the control system (and/or device). Finally, program checks

can be performed (such as changing the device ID or creating an IP table)

to ensure proper functioning.

Establishing Communication

Use Crestron Toolbox for communicating with the C2N-RTHS; refer to

the Crestron Toolbox help file for details. There is a single method of

communication: indirect.

Indirect Communication

Cresnet

Control System

PC Running

Crestron Toolbox

or USB

Serial,

LAN

C2N-RTHS

The C2N-RTHS connects to control system via Cresnet:

1. Establish communication between the PC and the control system as

described in the latest version of the 2-Series Control Systems

Reference Guide (Doc. 6256).

2. Use the Address Book in Crestron Toolbox to create an entry for

the C2N-RTHS using the expected communication protocol

(indirect). Select the Cresnet ID of the C2N-RTHS and the address

book entry of the control system that is connected to the

C2N-RTHS.

3. Display the C2N-RTHS’s “System Info” window (click the

icon); communications are confirmed when the device information

is displayed.

12 • Sensor, Cresnet

Operations and Installation Guide - DOC. 6232B

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Crestron C2N-RTHS Installation Guide Page 16