Crestron CEN-NVS100 Installation Guide download pdf (Page 35)

Crestron CEN-NVS100 Network Video Streamer

Configuring HTTP Settings

Configure HTTP settings in the HTTP pane of the “Network” configuration page.

“Network” Configuration Page – HTTP

Refer to the following HTTP configuration guidelines.

Authentication: From the drop-down list, select either of the following

authentication mechanisms:

• Basic: (Recommended setting) Authenticates a user based on user name

and password. The password is not encrypted; therefore, basic

authentication is not secure.

• Digest: Authenticates a user based on user name and password.

The password is encrypted.

NOTE: Although Digest authentication is a more secure authentication

mechanism than Basic authentication, Digest authentication is not

currently supported by all Web clients.

HTTP Port: Enter the HTTP port number. The default port number is 80.

NOTE: If you do not use the default number of 80, you must append the port

number to the IP address of the CEN-NVS100 to be able to access the CEN-NVS100

from your Web browser. For example, if you set the HTTP port number to 8888, you

must enter

http://192.168.0.100:8888 instead of http://192.168.0.100.

Secondary HTTP Port: Enter the secondary HTTP port number to allow the

configuration of an alternate port to access the HTTP server.

Access Name for Stream 1: Enter the name to be used by the Crestron MJPEG

Viewer application. For example, when using video.mjpg (default setting), the

HTTP command to be entered into the Crestron MJPEG Viewer is the following:

/video.mjpg?user=myuser&pw=secretpassword

video.mjpg is the default access name.

myuser is the user created for view access.

secretpassword is the password for this user.

Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100 • 31

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

No comments

Crestron CEN-NVS100 Installation Guide Page 35