Crestron CEN-NVS100 Installation Guide download pdf (Page 37)

Crestron CEN-NVS100 Network Video Streamer

Configuring RTSP Streaming

Configure RTSP (Real Time Streaming Protocol) in the RTSP Streaming pane of the

“Network” configuration page.

“Network” Configuration Page – RTSP Streaming

Refer to the following RTSP streaming configuration guidelines.

Authentication: From the drop-down list, select disable or enable.

Access Name for Stream 1: Enter an access name for stream 1 for connections from

client software when the codec type of the stream is MPEG-4. For example, when set

to live.sdp (default setting), the following URL connects directly to the MPEG-4

video:

rtsp://ip address/live.sdp

ip address is the IP address of the CEN-NVS100.

live.sdp is the default access name.

Access Name for Stream 2: Enter an access name for stream 2 for connections from

client software when the codec type of the stream is MPEG-4. For example, when set

to live2.sdp (default setting), the following URL connects directly to the MPEG-4

video:

rtsp://ip address/live2.sdp

ip address is the IP address of the CEN-NVS100.

live2.sdp is the default access name.

Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100 • 33

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

No comments

Crestron CEN-NVS100 Installation Guide Page 37