Crestron TPMC-4X Specifications download pdf (Page 22)

Isys i/O

™

Handheld WiFi Touchpanel Crestron TPMC-4X

“WLAN Settings” Window – About Tab

The tab shows version information for the WiFi subsystem of the TPMC-4X. For the

overall software version of the TPMC-4X, press the About button on the setup

screen.

CtrlSys IP Address

Selecting the CtrlSys IP Address button displays the “Control System Information”

window that allows you to enter the control system’s name, its port address, and its

IP ID. Refer to the following figure.

“Control System Information” Window

STANDBY and POWER DOWN Timeouts

Use these two settings on the setup window to specify the standby and the power

down timeout values. Standby timeout (default is 5 minutes) is the time (up to 120

minutes) from the last use of the touchpanel before going into standby mode (screen

display is off but the unit is still on). Power down timeout (default is 25 minutes) is

the time (up to 120 minutes) from going into standby mode before turning off unit

power. Both timeouts are adjustable in one-minute increments.

About

Press the About button to display a screen that shows software and OS version

information.

Save & Exit

Press the Save & Exit button to save any setup changes you have made and exit to

normal operation mode.

18 • Isys i/O

™

Handheld WiFi Touchpanel: TPMC-4X Operations Guide - DOC. 6499

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Crestron TPMC-4X Specifications Page 22