Crestron TPS-IMC User Manual download pdf (Page 9)

Crestron TPS-IMC-BV Interface Module

Operations Guide - DOC. 5921 Interface Module: TPS-IMC-BV •• 5

AUDIO INPUT Pinouts (6-Pin Port)

PIN DESCRIPTION

S Shield

R+ Right Positive

R- Right Negative

L+ Left Positive

L- Left Negative

S Shield

• MIC OUT – The port mates with a three-pin connector, supplied, and

produces line level differential output. Description of the pinouts is

shown in the table after this paragraph.

MICROPHONE Pinouts

PIN DESCRIPTION

M+ Positive

M- Negative

S Shield

BAL/COAX Video Switch

A single two-position toggle switch is centrally located on the top panel of the

TPS-IMC-BV. Each position is labeled on the unit. Use the switch to select between

balanced video (BAL) and unbalanced video (COAX).

Leading Specifications

The table after this paragraph provides a summary of leading specifications for the

TPS-IMC-BV. Dimensions and weight are rounded to the nearest hundredth unit.

Leading Specifications for the TPS-IMC-BV

SPECIFICATION DETAILS

Dimensions

Height: 3.20 in (8.13 cm)

Width: 7.70 in (19.56 cm)

Depth: 1.25 in (3.18 cm)

Weight 1.15 lb (0.52 kg)

As of the date of manufacture, the TPS-IMC-BV has been tested and found to

comply with specifications for CE marking.

Setup

Network Wiring

NOTE: When making wire connections, refer to the latest revision of the Cresnet

Network Interconnect Drawing (Doc. 5411). The document can be obtained from the

Downloads page (CABLES and MANUAL Libraries) of the Crestron website (www.

crestron.com). Search for the CRESNET.PDF files.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Crestron TPS-IMC User Manual Page 9