Crestron TPS-3000 Specifications download pdf (Page 36)

6.4 Inch Tilt Touchpanel Crestron Isys

TPS-3000

Communication Settings

Connection of a PC to the TPS-3000 touchpanel can be direct via the RS-232 port on

the touchpanel or through a control system (Cresnet). Both methods of connection

provide setup for RS-232 communication. If TCP/IP communication is preferred,

consult the latest version of the Crestron e-Control Reference Guide (Doc. 6052) or

the respective Operations Guide for the control system. These documents are

available from the Downloads | Product Manuals section of the Crestron website.

To prepare the TPS-3000 for uploading or upgrading through a control system, refer

to the following figure for a typical communication connection diagram.

Typical Connection Diagram when Uploading a Project

To prepare the TPS-3000 for uploading or upgrading directly from a PC, refer to the

following figure. Connect the RS-232 port of the computer directly to the RS-232

port of the touchpanel. Refer to page 18 for RS-232 cable information.

Typical Connection Diagram when Uploading a Project Directly to the Touchpanel

32 • 6.4 Inch Tilt Touchpanel: Crestron Isys

TPS-3000 Operations Guide – DOC. 6076A

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

No comments

Crestron TPS-3000 Specifications Page 36