Crestron C2N-DVP4DI User Manual download pdf (Page 3)

Crestron Voting Module V2 ControlWorks Consulting, LLC

Telephone: (+1)440-449-1100 [email protected] http://www.controlworks.com

Module Application

It is strongly suggested that you load the supplied demonstration program and touchpanel to

gain an understanding of the application of the module before you attempt to implement the

module in your own program. In fact, many programmers fine it easiest to take our demo

program and add A/V and other functionality to it, rather than adding this module to another

program. It will make things very difficult if you do not run and fully understand the

operation of the demo program before attempting to use this module in another

program.

In order to use this module, you must have inserted a Compact Flash card into your Crestron

processor. ControlWorks supports only the use of SanDisk compact flash cards with Crestron

processors. If you are having problems and are using another manufacturer’s compact flash

card, do not call until you have replaced the card with a genuine SanDisk card.

NVRAM disk is not appropriate for this application, as one of the functions is storing a backup of

the voting results. The Compact Flash card can be removed and the contents read from a PC in

the event that the backup data needs to be accessed.

Copy the contents of the distribution ZIP file into the same folder as your program. Re-synch

your program, and then copy and paste the ControlWorks_Voting_v2 module into your program

from the demonstration program. Connect the signals to your touchpanels or keypads, the

optional e-Datalog symbol, and the optional e-PowerPoint symbol.

At this point you should be able to run the module successfully. Begin by entering names for the

meeting types and users, and creating a seating chart.

Important Note: The user names and seating chart are stored during the shutdown sequence.

The input system_power_off must be pulsed at the end of the meeting, or your database will

not be stored.

1 2 3 4 5 6 7 8 ... 16 17

No comments

Crestron C2N-DVP4DI User Manual Page 3