Crestron C2N-DVP4DI User Manual download pdf (Page 6)

E-Datalog Configuration

If you are using the optional voting results export to Excel, you must first install Crestron’s e-

Datalog application on the computer that will receive the results. You will also need to add

the e-Datalog symbol in SIMPL Windows on the same IP ID with the loopback IP address in

the IP table (127.0.0.1). See the demo program for an example of the implementation of the

e-DataLog symbol in SIMPL Windows.

To configure e-Datalog’s connection to the Crestron processor, install the application on the

computer that will host the agenda information, launch the application, and select View >

Systems.

If there is no system listed, click Add System. If there is already a system listed, highlight

it and click Edit System.

Enter the IP address of the control system processor in both fields, and the unique IP ID you

assigned in SIMPL windows. Check the Enabled box.

You should now see the connection listed as online in the Systems list. If not, close the

application and launch it again. Make sure the IP table on the processor reflects the loopback

address of 127.0.0.1 on the assigned IP ID. Confirm that the Enabled box is checked for the

system.

Crestron Voting Module V2 ControlWorks Consulting, LLC

Telephone: (+1)440-449-1100 [email protected] http://www.controlworks.com

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

No comments

Crestron C2N-DVP4DI User Manual Page 6