Crestron CNX-PAD8 Specifications download pdf (Page 24)

Professional Audio Distribution Processor Crestron CNX-PAD8A

The CNX-PAD8A receives signals from the previously discussed symbols. The

CNX-PAD8A receives (E) audio from the selected source, signals to illuminate the

front panel LED for Room 1 when it is enabled to receive audio, the audio volume

level and mute signal. The remaining inputs (G) are not used in the CNX-PAD8A

basic program.

Detail View of CNX-PAD8A Symbol (ID-44) in SIMPL Windows’ Programming Manager

Problem Solving

Troubleshooting

The table below provides corrective action for possible trouble situations. If further

assistance is required, please contact a Crestron customer service representative.

CNX-PAD8A Troubleshooting

TROUBLE

POSSIBLE

CAUSE(S)

CORRECTIVE ACTION

PWR LED does

not illuminate.

CNX-PAD8A is not

receiving power.

Verify that cable plugged into NET port is

secure.

NET LED does

not illuminate.

Loose network

connection.

Verify that cables plugged into NET port is

secure.

Improper NET ID. Verify that CNX-PAD8A NET ID matches NET

ID software program. Refer to "Identity Code".

ROOM 1-8 LED

does not

illuminate.

Improper

programming.

Confirm signal names and programming logic

so that LEDs respond when functions are

activated.

Hum on audio. Grounding problem. Either connect or remove chassis ground wire.

20 • Professional Audio Distribution Processor: CNX-PAD8A Operations Guide – DOC. 8174

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

Crestron CNX-PAD8 Specifications Page 24