Crestron CP2E Specifications download pdf (Page 19)

Crestron CP2 & CP2E 2-Series Compact Control System

connectors. Alternatively, use a CAT5 crossover cable to connect the two

LAN ports directly, without using a hub or router.

• Use the Address Book in the Crestron Toolbox to create an entry for the

CP2E with the CP2E’s TCP/IP communication parameters.

• Display the “System Info” window (click the

icon) and select the

CP2E entry.

• Use the Crestron Toolbox to create the CP2E IP table.

Select Functions | IP Table Setup. ⇒

⇒

Either add, modify, or delete entries in the IP table. The CP2E can

have only one IP table entry.

A defined IP table can be saved to a file or sent to the device.

• When using the CP2E as a “slave”, edit the “master” control system’s IP

table to include an entry for the CP2E. The entry should list the CP2E’s IP

ID (specified on the CP2E’s IP table) and the internal gateway IP address

127.0.0.1.

Programs and Firmware

• Display the network device tree (Tools | Network Device Tree) to show all

network devices connected to the control system. Right-click on the CP2 or

CP2E to display actions that can be performed on the CP2 or CP2E:

Upgrade firmware

Change Net ID

• Upload the SIMPL Windows file to the control system using SIMPL

Windows or Crestron Toolbox.

• Upgrade CP2 & CP2E firmware via Crestron Toolbox.

Establish serial or TCP/IP communications with the CP2 (serial

only) or CP2E and display the “System Info” window.

Select Functions | Firmware… to upgrade the CP2 or CP2E

firmware.

For details on uploading and upgrading, refer to the SIMPL Windows help file or the

Crestron Toolbox help file.

Operations Guide – DOC. 5980A 2-Series Compact Control System: CP2 & CP2E • 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Crestron CP2E Specifications Page 19