Crestron iMedia IM-RXV1 Installation Guide Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
iMedia Receiver/Processor with Video Crestron IM-RXV1 & IM-RXV3
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade, it is necessary to establish
communication.
Establishing Communication
Use Crestron Toolbox for communicating with the IM-RXV1 and IM-RXV3; refer
to the Crestron Toolbox help file for details. There are two methods of
communication.
Direct Serial Communication
NOTE: Required for initial setup of Ethernet parameters.
Direct Serial Communication
PC RUNNING
CRESTRON TOOLBOX
IM-RXV1 / IM-RXV3
SERIAL VIA CRESTRON
CABLE STCP-502
OR EQUIVALENT
The COMPUTER port on the IM-RXV1 and IM-RXV3 connects to the
serial port on the PC via a serial cable (Crestron STCP-502 or equivalent).
Use the Address Book in Crestron Toolbox to create an entry using the
expected serial communication protocol (RS232, auto-detect baud rate, no
parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS enabled).
Display the IM-RXV1 or IM-RXV3’s “System Info” window (click the
icon); communications are confirmed when the device information is
displayed.
TCP/IP Communication
Ethernet Communication
PC RUNNING
CRESTRON TOOLBOX
ETHERNET
IM-RXV1 / IM-RXV3
Establish direct serial communication between IM-RXV1/IM-RXV3 and
PC.
Enter the IP address, IP mask, and default router of the IM-RXV1/
IM-RXV3 via the Crestron Toolbox (Functions | Ethernet Addressing);
otherwise enable DHCP.
Confirm Ethernet connections between IM-RXV1/IM-RXV3 and PC. If
connecting through a hub or router, use CAT5 straight through cables with
8-pin RJ-45 connectors. Alternatively, Use a CAT5 crossover cable to
connect the two LAN ports directly, without using a hub or router.
Use the Address Book in the Crestron Toolbox to create an entry for the
IM-RXV1/IM-RXV3 with the IM-RXV1/IM-RXV3’s TCP/IP
communication parameters.
16 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3 Operations & Installation Guide – DOC. 6478
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments