Crestron iMedia IM-RXV1 Installation Guide Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Crestron IM-RXV1-M & IM-RXV3-M iMedia Receiver with Video & Mic Input
Signal Selection
The RGB signal connected to the IM transmitter is delivered to the display device
(e.g., projector) via the RGBHV output of an IM receiver. The composite video
signal connected to the IM transmitter is delivered to the display device (e.g.,
projector) via the composite video output of an IM receiver. Each IM transmitter
possesses a SELECT button (IM transmitters with video have two SELECT
buttons) that activates an input. The receiver automatically routes the last activated
input to the RGB or composite video output and deactivates any prior selection. In
addition, the display's power and input selection commands can be controlled via the
IR or COM port.
Video Resolution and Cable Length
The receiver can accomplish frequency compensation on each input to achieve
correct operation. This compensation scheme is effective for CresCAT-IM cables as
long as the maximum skew of 15 ns per 100 meters is not exceeded.
NOTE: For proper operation and performance of every iMedia system, always use
CresCAT-IM cable.
Maximum Resolution and Cable Length
RESOLUTION REFRESH
RATE
(HZ)
PIXEL
RATE
(MHZ)
PIXEL
TIME (NS)
MAX
LENGTH
(FEET)
VGA 60 25.18 39.7 218.5
(640 X 480) 72 31.50 31.7 174.6
85 36.00 27.8 152.8
SVGA 56 36.00 27.8 152.8
(800 X 600) 72 50.00 20.0 110.0
85 56.25 17.8 97.8
XGA 60 65.00 15.4 84.6
(1024 X 768) 70 75.00 13.3 73.3
85 94.50 10.6 58.2
SXGA 60 108.00 9.3 50.9
(1280 X 1024) 75 135.00 7.4 40.7
85 157.50 6.3 34.9
UXGA 60 162.00 6.2 34.0
(1600 X 1200) 70 189.00 5.3 29.1
85 229.50 4.4 24.0
COMPOSITE
VIDEO
218.5
For more information on CresCAT and other wire products, visit the Crestron
website (http://www.crestron.com/downloads/pdf/product_line_overviews/overview-
wire_and_cable.pdf).
Identity Code
The IP ID is set within the IM-RXV1-M or IM-RXV3-M’s table using Crestron
Toolbox™. For information on setting an IP table, refer to the Crestron Toolbox help
file. The IP IDs of multiple IM-RXV1-M or IM-RXV3-M devices in the same
system must be unique.
Operations & Installation Guide – DOC. 6593A iMedia Receiver: IM-RXV1-M & IM-RXV3-M 13
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments