Crestron TPMC-8X-BTP Specifications download pdf (Page 63)

Crestron TPMC-8X Isys i/O

8.4” WiFi Touchpanel

Firmware

Check the Crestron website to find the latest firmware. (New users may be required

to register to obtain access to certain areas of the site, including the FTP site.)

Upgrade TPMC-8X firmware via Crestron Toolbox.

1. Establish serial or TCP/IP communications with the TPMC-8X and display

the “System Info” window.

2. Select Functions | Firmware… to upgrade the TPMC-8X firmware.

Program Checks

In Crestron Toolbox, display the “System Info window (click the

icon) and

select the Functions menu to display actions that can be performed on the

TPMC-8X.

Be sure to use the Crestron Toolbox to create the TPMC-8X IP table.

1. Select Functions | IP Table Setup.

2. Add, modify or delete entries in the IP table. The TPMC-8X can have only

one IP table entry.

3. A defined IP table can be saved to a file or sent to the device.

Edit the control system’s IP table to include an entry for the TPMC-8X. The entry

should list the TPMC-8X’s IP ID (specified on the TPMC-8X’s IP table) and the

internal gateway IP address 127.0.0.1.

To prevent interference with other 802.11 devices that may be operating nearby,

channels should be adequately spaced when configuring your wireless network;

channels 1, 6 and 11 are the only non-overlapping channels. Refer to the information

supplied with the WAP for instructions concerning channel selection.

Operations Guide – DOC. 6539C Isys i/O

8.4” WiFi Touchpanel: TPMC-8X • 59

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

No comments

Crestron TPMC-8X-BTP Specifications Page 63