Crestron TPMC-8X-BTP Specifications download pdf (Page 41)

Crestron TPMC-8X-GA 8.4” WiFi Touch Screen

Operations Guide – DOC. 7078H 8.4” WiFi Touch Screen: TPMC-8X-GA

•

NOTE: If a new SIMPL program is loaded in the control system, the passcode in

the previous program can be cleared by rebooting the touch screen.

The Show Plain-Text Passcode Dialog checkbox causes the entered text to appear

instead of asterisks, when a passcode is entered.

In addition, the Show Pop-up Release Icon checkbox makes a release icon available

when a project is views on the touch screen.

Release Icon

The Hardbutton #4 Releases Panel checkbox can be used to enable or disable button

#4 from releasing the touch screen from the docking station.

Save & Reboot and Shut Down Details

To save any changes and reboot the touch screen, touch Save & Reboot, located in

the lower right section of the setup menu.

To turn off the touch screen, touch Shut Down, located in the lower right section of

the setup menu. This is the recommended method for shutting down the touch

screen. After the touch screen has shut down, the power supply can be safely

removed from the touch screen.

Exit Details

Touch Exit to leave the setup menu and return to the project. If no project has been

loaded, the touch screen displays an error message and return to the setup menu.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

No comments

Crestron TPMC-8X-BTP Specifications Page 41