DM-TX-200-C-2G Wall Plate DigitalMedia 8G+
™
Transmitter 200
crestron.com
|
800.237.2041
Multimedia Computer/AV Interface
The DM-TX-200-C-2G provides simple switching between two inputs. The
inputs can be configured to switch automatically or be selected through a
Crestron control system. Inputs include:
• HDMI — Provides a digital multimedia input for mobile devices,
computers, and AV sources with resolutions up to HD 1080p60 and
WUXGA. Also handles DVI and DisplayPort Multimode signals using
an appropriate adapter or interface cable
[3]
.
• PC — This VGA type input handles analog RGB signals up to
WUXGA 1920x1200 pixels, as well as analog video up to 1080p60
[4]
.
A 1/8” (3.5 mm) stereo audio input is included to accommodate the
analog audio signal from an unbalanced line-level source or
headphone output.
Note: Audio breakaway capability enables the analog audio input to be
used with either video input.
A single CAT type cable connects the DM-TX-200-C-2G to a DM switcher
or receiver, or to an HDBaseT device, transporting video, audio, control,
networking, and power signals all through one simple RJ45 connection.
[2,5]
Used with a single DM 8G+ Receiver/Room Controller and optional
Crestron control system, the DM-TX-200-C-2G affords a simple solution
for extending a computer or AV signal to a single display. As part of a larger
system using a DM-MD series switcher, multiple DM-TX-200-C-2Gs may
be installed to enable the distribution of several sources at different
locations to feed multiple displays throughout any room or larger facility.
USB HID Signal Extension
The DM-TX-200-C-2G functions as a keyboard/mouse extender, allowing
a USB HID-compliant keyboard and/or mouse to be connected at the wall
plate and used to control a computer or other component located at the
central equipment rack or some other location.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the
control desired for a seamless user experience. DigitalMedia provides an
alternative to conventional IR and RS-232 device control by harnessing
the CEC (Consumer Electronics Control) signal embedded in HDMI.
Through its connection to the control system, the DM-TX-200-C-2G
provides a gateway for controlling the connected source device right
through the HDMI connection, potentially eliminating the need for any
dedicated control wires or IR emitters.
Simple Wall Box Mounting
The DM-TX-200-C-2G is designed to be installed using a 2-gang electrical
box or plaster ring. It also fits a 2-gang opening in a typical 6” deep floor
box. The DM cable connects to the rear of the transmitter via a shielded
RJ45 DM port. The unit can be powered using the wall mount power pack
(included), or via PoDM (Power over DigitalMedia) for a true one-wire
solution
[5]
. An array of indicators is provided for easy setup and
troubleshooting.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
SPECIFICATIONS
Video
Switcher: 2x1 combination digital/analog switch, Crestron
QuickSwitch HD
®
Input Signal Types: HDMI
®
, DVI
[3]
, DisplayPort Multimode
[3]
, RGB/VGA,
component
[4]
, S-Video
[4]
, composite
[4]
Output Signal Types: DM 8G+
™
(DigitalMedia
™
over one CAT type twisted
pair copper wire), HDBaseT
®
[1]
Formats: DM 8G+, HDBaseT, HDMI, DVI, HDCP content protection support,
RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL
DM-TX-200-C-2G-B-T – Front and Rear Views
(40 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals